On Mon, 23 Mar 2020 at 17:20, Heinrich Schuchardt <xypron.g...@gmx.de>
wrote:
> On 3/23/20 8:11 AM, Sughosh Ganu wrote:
> > Add a efidebug subcommand to initiate a firmware update using the efi
> > firmware management protocol(fmp) set_image routine.
> >
> > The firmware update can be initiated through
> >
> > 'efidebug capsule disk-update'
> >
> > This would locate the efi capsule file on the efi system partition,
> > and call the platform's set_image fmp routine to initiate the firmware
> > update.
>
> Hello Sughosh,
>
> why do we need this command? Shouldn't a simple reset do the job?
>
> See chapter 8.5.5 "Delivery of Capsules via file on Mass Storage device"
> of UEFI spec 2.8.
>
Like i have mentioned in the cover letter, we need to invoke
capsule-on-disk update during the platform boot -- that is on the Todo
list. The spec requires setting the
EFI_OS_INDICATIONS_FILE_CAPSULE_DELIVERY_SUPPORTED flag in the
OsIndications variable. But we would not be supporting that, at least for
now, since we do not have support of runtime variables on our platforms.
The idea is to invoke a capsule-on-disk update during the platform boot. I
think Takahiro will be working on this.
>
> What might be of interest is a command to start a capsule from a memory
> location. This would allow to load capsules from other locations than
> directory \EFI\UpdateCapsule.
>
Takahiro has indeed added this command which updates a capsule which has
been loaded into the memory. I thought it might be easier to invoke a
command where the user is not required to load the capsule into memory
first, but that is taken care of directly by the capsule update logic. That
said, I can drop the patch if you prefer just having the version which
updates the capsule from memory.
-sughosh
>
> Best regards
>
> Heinrich
>
> >
> > Signed-off-by: Sughosh Ganu <sughosh.g...@linaro.org>
> > ---
> > cmd/efidebug.c | 14 ++++++++++++++
> > 1 file changed, 14 insertions(+)
> >
> > diff --git a/cmd/efidebug.c b/cmd/efidebug.c
> > index 4a7661d0ac..fd8366dc90 100644
> > --- a/cmd/efidebug.c
> > +++ b/cmd/efidebug.c
> > @@ -77,6 +77,16 @@ static int do_efi_capsule_update(cmd_tbl_t *cmdtp,
> int flag,
> > return CMD_RET_SUCCESS;
> > }
> >
> > +static int do_efi_capsule_on_disk_update(cmd_tbl_t *cmdtp, int flag,
> > + int argc, char * const argv[])
> > +{
> > + efi_status_t ret;
> > +
> > + ret = efi_launch_capsules();
> > +
> > + return ret == EFI_SUCCESS ? CMD_RET_SUCCESS : CMD_RET_FAILURE;
> > +}
> > +
> > /**
> > * do_efi_capsule_show() - show capsule information
> > *
> > @@ -205,6 +215,8 @@ static cmd_tbl_t cmd_efidebug_capsule_sub[] = {
> > "", ""),
> > U_BOOT_CMD_MKENT(show, CONFIG_SYS_MAXARGS, 1, do_efi_capsule_show,
> > "", ""),
> > + U_BOOT_CMD_MKENT(disk-update, 0, 0, do_efi_capsule_on_disk_update,
> > + "", ""),
> > U_BOOT_CMD_MKENT(result, CONFIG_SYS_MAXARGS, 1, do_efi_capsule_res,
> > "", ""),
> > };
> > @@ -1387,6 +1399,8 @@ static char efidebug_help_text[] =
> > #ifdef CONFIG_EFI_CAPSULE_UPDATE
> > "efidebug capsule update [-v] <capsule address>\n"
> > " - process a capsule\n"
> > + "efidebug capsule disk-update\n"
> > + " - update a capsule from disk\n"
> > "efidebug capsule show <capsule address>\n"
> > " - show capsule information\n"
> > "efidebug capsule result [<capsule result var>]\n"
> >
>
>
