Add IIC3 node from mainline Linux DT. This will be further updated in
subsequent DT sync, however adding this node for now is sufficient and
minimal change.
Signed-off-by: Marek Vasut <marek.vasut+rene...@gmail.com>
Cc: Nobuhiro Iwamatsu <iwama...@nigauri.org>
---
arch/arm/dts/r8a7792.dtsi | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/arch/arm/dts/r8a7792.dtsi b/arch/arm/dts/r8a7792.dtsi
index 8e9eb4b704..6fd80e3541 100644
--- a/arch/arm/dts/r8a7792.dtsi
+++ b/arch/arm/dts/r8a7792.dtsi
@@ -444,6 +444,23 @@
status = "disabled";
};
+ iic3: i2c@e60b0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,iic-r8a7792",
+ "renesas,rcar-gen2-iic",
+ "renesas,rmobile-iic";
+ reg = <0 0xe60b0000 0 0x425>;
+ interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 926>;
+ dmas = <&dmac0 0x77>, <&dmac0 0x78>,
+ <&dmac1 0x77>, <&dmac1 0x78>;
+ dma-names = "tx", "rx", "tx", "rx";
+ power-domains = <&sysc R8A7792_PD_ALWAYS_ON>;
+ resets = <&cpg 926>;
+ status = "disabled";
+ };
+
dmac0: dma-controller@e6700000 {
compatible = "renesas,dmac-r8a7792",
"renesas,rcar-dmac";
--
2.25.1
