From: Tom Warren <twar...@nvidia.com>
This Tegra QSPI driver hadn't been brought up to date with how
DM drivers are fetching data from the FDT now, and was pulling
in bogus data for base, max freq, etc. Fixed ofdata_to_platdata
to work the same way it does in the tegra114 SPI driver, using
dev_read_ functions.
Signed-off-by: Tom Warren <twar...@nvidia.com>
---
drivers/spi/tegra210_qspi.c | 10 ++++------
1 file changed, 4 insertions(+), 6 deletions(-)
diff --git a/drivers/spi/tegra210_qspi.c b/drivers/spi/tegra210_qspi.c
index 4284ea9..466d572 100644
--- a/drivers/spi/tegra210_qspi.c
+++ b/drivers/spi/tegra210_qspi.c
@@ -2,7 +2,7 @@
/*
* NVIDIA Tegra210 QSPI controller driver
*
- * (C) Copyright 2015-2019 NVIDIA Corporation <www.nvidia.com>
+ * (C) Copyright 2015-2020 NVIDIA Corporation <www.nvidia.com>
*
*/
@@ -97,10 +97,8 @@ struct tegra210_qspi_priv {
static int tegra210_qspi_ofdata_to_platdata(struct udevice *bus)
{
struct tegra_spi_platdata *plat = bus->platdata;
- const void *blob = gd->fdt_blob;
- int node = dev_of_offset(bus);
- plat->base = devfdt_get_addr(bus);
+ plat->base = dev_read_addr(bus);
plat->periph_id = clock_decode_periph_id(bus);
if (plat->periph_id == PERIPH_ID_NONE) {
@@ -110,9 +108,9 @@ static int tegra210_qspi_ofdata_to_platdata(struct udevice
*bus)
}
/* Use 500KHz as a suitable default */
- plat->frequency = fdtdec_get_int(blob, node, "spi-max-frequency",
+ plat->frequency = dev_read_u32_default(bus, "spi-max-frequency",
500000);
- plat->deactivate_delay_us = fdtdec_get_int(blob, node,
+ plat->deactivate_delay_us = dev_read_u32_default(bus,
"spi-deactivate-delay", 0);
debug("%s: base=%#08lx, periph_id=%d, max-frequency=%d,
deactivate_delay=%d\n",
__func__, plat->base, plat->periph_id, plat->frequency,
--
1.8.2.1.610.g562af5b
-----------------------------------------------------------------------------------
This email message is for the sole use of the intended recipient(s) and may
contain
confidential information. Any unauthorized review, use, disclosure or
distribution
is prohibited. If you are not the intended recipient, please contact the
sender by
reply email and destroy all copies of the original message.
-----------------------------------------------------------------------------------
