Fix reading and printing of CFI flashes 16-bit devices identifiers Nowadays CFI flashes have a 16-bit device identifier. U-boot still print them and read them as if they were only 8-bit wide. Fix that. Before: Intel Extended command set, Manufacturer ID: 0x89, Device ID: 0x1B After: Intel Extended command set, Manufacturer ID: 0x89, Device ID: 0x881B
Signed-off-by: Philippe De Muyter <p...@macqel.be> --- drivers/mtd/cfi_flash.c | 11 +++++++---- 1 files changed, 7 insertions(+), 4 deletions(-) diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c index 013d4ad..8fb6c2e 100644 --- a/drivers/mtd/cfi_flash.c +++ b/drivers/mtd/cfi_flash.c @@ -1142,8 +1142,10 @@ void flash_print_info (flash_info_t * info) printf ("Unknown (%d)", info->vendor); break; } - printf (" command set, Manufacturer ID: 0x%02X, Device ID: 0x%02X", - info->manufacturer_id, info->device_id); + printf (" command set, Manufacturer ID: 0x%02X, Device ID: 0x", + info->manufacturer_id); + printf (info->chipwidth == FLASH_CFI_16BIT ? "%04X" : "%02X", + info->device_id); if (info->device_id == 0x7E) { printf("%04X", info->device_id2); } @@ -1494,8 +1496,9 @@ static void cmdset_intel_read_jedec_ids(flash_info_t *info) udelay(1000); /* some flash are slow to respond */ info->manufacturer_id = flash_read_uchar (info, FLASH_OFFSET_MANUFACTURER_ID); - info->device_id = flash_read_uchar (info, - FLASH_OFFSET_DEVICE_ID); + info->device_id = (info->chipwidth == FLASH_CFI_16BIT) ? + flash_read_word (info, FLASH_OFFSET_DEVICE_ID) : + flash_read_uchar (info, FLASH_OFFSET_DEVICE_ID); flash_write_cmd(info, 0, 0, FLASH_CMD_RESET); } -- 1.6.3.3 -- Philippe De Muyter phdm at macqel dot be Tel +32 27029044 Macq Electronique SA rue de l'Aeronef 2 B-1140 Bruxelles Fax +32 27029077 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot