This function is a bit large for an inline function, and for U-Boot
proper, it is called via a function pointer anyway (in board_r.c), so
cannot be inlined.
It will shortly set a global variable to be used by the
watchdog_reset() function in wdt-uclass.c, so this also allows making
that variable local to wdt-uclass.c.
The WATCHDOG_TIMEOUT_SECS define is not used elsewhere.
Signed-off-by: Rasmus Villemoes <rasmus.villem...@prevas.dk>
---
drivers/watchdog/wdt-uclass.c | 33 +++++++++++++++++++++++++++++++++
include/wdt.h | 35 +----------------------------------
2 files changed, 34 insertions(+), 34 deletions(-)
diff --git a/drivers/watchdog/wdt-uclass.c b/drivers/watchdog/wdt-uclass.c
index 309a0e9c5b..fb3e247c5f 100644
--- a/drivers/watchdog/wdt-uclass.c
+++ b/drivers/watchdog/wdt-uclass.c
@@ -13,6 +13,39 @@
DECLARE_GLOBAL_DATA_PTR;
+#define WATCHDOG_TIMEOUT_SECS (CONFIG_WATCHDOG_TIMEOUT_MSECS / 1000)
+
+int initr_watchdog(void)
+{
+ u32 timeout = WATCHDOG_TIMEOUT_SECS;
+
+ /*
+ * Init watchdog: This will call the probe function of the
+ * watchdog driver, enabling the use of the device
+ */
+ if (uclass_get_device_by_seq(UCLASS_WDT, 0,
+ (struct udevice **)&gd->watchdog_dev)) {
+ debug("WDT: Not found by seq!\n");
+ if (uclass_get_device(UCLASS_WDT, 0,
+ (struct udevice **)&gd->watchdog_dev)) {
+ printf("WDT: Not found!\n");
+ return 0;
+ }
+ }
+
+ if (CONFIG_IS_ENABLED(OF_CONTROL)) {
+ timeout = dev_read_u32_default(gd->watchdog_dev, "timeout-sec",
+ WATCHDOG_TIMEOUT_SECS);
+ }
+
+ wdt_start(gd->watchdog_dev, timeout * 1000, 0);
+ gd->flags |= GD_FLG_WDT_READY;
+ printf("WDT: Started with%s servicing (%ds timeout)\n",
+ IS_ENABLED(CONFIG_WATCHDOG) ? "" : "out", timeout);
+
+ return 0;
+}
+
int wdt_start(struct udevice *dev, u64 timeout_ms, ulong flags)
{
const struct wdt_ops *ops = device_get_ops(dev);
diff --git a/include/wdt.h b/include/wdt.h
index e833d3a772..aea5abc768 100644
--- a/include/wdt.h
+++ b/include/wdt.h
@@ -106,39 +106,6 @@ struct wdt_ops {
int (*expire_now)(struct udevice *dev, ulong flags);
};
-#if CONFIG_IS_ENABLED(WDT)
-#define WATCHDOG_TIMEOUT_SECS (CONFIG_WATCHDOG_TIMEOUT_MSECS / 1000)
-
-static inline int initr_watchdog(void)
-{
- u32 timeout = WATCHDOG_TIMEOUT_SECS;
-
- /*
- * Init watchdog: This will call the probe function of the
- * watchdog driver, enabling the use of the device
- */
- if (uclass_get_device_by_seq(UCLASS_WDT, 0,
- (struct udevice **)&gd->watchdog_dev)) {
- debug("WDT: Not found by seq!\n");
- if (uclass_get_device(UCLASS_WDT, 0,
- (struct udevice **)&gd->watchdog_dev)) {
- printf("WDT: Not found!\n");
- return 0;
- }
- }
-
- if (CONFIG_IS_ENABLED(OF_CONTROL)) {
- timeout = dev_read_u32_default(gd->watchdog_dev, "timeout-sec",
- WATCHDOG_TIMEOUT_SECS);
- }
-
- wdt_start(gd->watchdog_dev, timeout * 1000, 0);
- gd->flags |= GD_FLG_WDT_READY;
- printf("WDT: Started with%s servicing (%ds timeout)\n",
- IS_ENABLED(CONFIG_WATCHDOG) ? "" : "out", timeout);
-
- return 0;
-}
-#endif
+int initr_watchdog(void);
#endif /* _WDT_H_ */
--
2.23.0
