Hi Sean > On 3/10/20 5:04 AM, Rick Chen wrote: > > Hi Sean > > > >> The Sipeed Maix series is a collection of boards built around the RISC-V > >> Kendryte K210 processor. This processor contains several peripherals to > >> accelerate neural network processing and other "ai" tasks. This includes a > >> "KPU" neural network processor, an audio processor supporting beamforming > >> reception, and a digital video port supporting capture and output at VGA > >> resolution. Other peripherals include 8M of sram (accessible with and > >> without caching); remappable pins, including 40 GPIOs; AES, FFT, and SHA256 > >> accelerators; a DMA controller; and I2C, I2S, and SPI controllers. Maix > >> peripherals vary, but include spi flash; on-board usb-serial bridges; ports > >> for cameras, displays, and sd cards; and ESP32 chips. Currently, only the > >> Sipeed Maix Bit V2.0 (bitm) is supported, but the boards are fairly > >> similar. > >> > >> Documentation for Maix boards is located at > >> <http://dl.sipeed.com/MAIX/HDK/>. Documentation for the Kendryte K210 is > >> located at <https://kendryte.com/downloads/>. However, hardware details are > >> rather lacking, so most technical reference has been taken from the > >> standalone sdk located at > >> <https://github.com/kendryte/kendryte-standalone-sdk>. > >> > >> Signed-off-by: Sean Anderson <sean...@gmail.com> > >> --- > > > > This patch applying fail > > > > Applying: riscv: Add Sipeed Maix support > > error: patch failed: doc/board/index.rst:16 > > error: doc/board/index.rst: patch does not apply > > Patch failed at 0001 riscv: Add Sipeed Maix support > > The copy of the patch that failed is found in: .git/rebase-apply/patch > > When you have resolved this problem, run "git am --continue". > > If you prefer to skip this patch, run "git am --skip" instead. > > To restore the original branch and stop patching, run "git am --abort". > > > > I have replied to you the same result in v5 > > [v5,33/33] riscv: Add Sipeed Maix support > > https://patchwork.ozlabs.org/patch/1246869/#2376311 > > As above, I just rebased against u-boot/master. I'm not sure what's > causing the problem here. > > > > > By the way, > > you can not mix them (arch, board, configs, doc)together in a patch. > > arch/riscv/Kconfig > > board/sipeed/maix/ ... > > configs/sipeed_maix_bitm_defconfig > > doc/board/index.rst > > Is there a preferred order for adding these? I will split them for v7.
Maybe you can group them as two patchs patch 19/20 arch/riscv/Kconfig board/sipeed/maix/Kconfig board/sipeed/maix/MAINTAINERS board/sipeed/maix/Makefile board/sipeed/maix/maix.c configs/sipeed_maix_bitm_defconfig include/configs/sipeed-maix.h patch 19/20 doc/board/index.rst doc/board/sipeed/index.rst doc/board/sipeed/maix.rst Thanks, Rick > > > Thanks, > > Rick >
