When generating ACPI tables we need to convert IRQs in U-Boot to the ACPI
structures required by ACPI. This is a SoC-specific conversion and cannot
be handled by generic code, so add a new IRQ method to do the conversion.
Signed-off-by: Simon Glass <s...@chromium.org>
---
Changes in v2: None
drivers/misc/irq-uclass.c | 18 +++++++-
include/acpi_device.h | 27 +++++++++++
include/irq.h | 41 +++++++++++++++++
lib/acpi/acpi_device.c | 94 +++++++++++++++++++++++++++++++++++++++
4 files changed, 178 insertions(+), 2 deletions(-)
diff --git a/drivers/misc/irq-uclass.c b/drivers/misc/irq-uclass.c
index 61aa10e465..b4a8b7b429 100644
--- a/drivers/misc/irq-uclass.c
+++ b/drivers/misc/irq-uclass.c
@@ -153,8 +153,6 @@ int irq_request(struct udevice *dev, struct irq *irq)
const struct irq_ops *ops;
log_debug("(dev=%p, irq=%p)\n", dev, irq);
- if (!irq)
- return 0;
ops = irq_get_ops(dev);
irq->dev = dev;
@@ -176,6 +174,22 @@ int irq_first_device_type(enum irq_dev_t type, struct
udevice **devp)
return 0;
}
+#if CONFIG_IS_ENABLED(ACPIGEN)
+int irq_get_acpi(const struct irq *irq, struct acpi_irq *acpi_irq)
+{
+ struct irq_ops *ops;
+
+ if (!irq_is_valid(irq))
+ return -EINVAL;
+
+ ops = irq_get_ops(irq->dev);
+ if (!ops->get_acpi)
+ return -ENOSYS;
+
+ return ops->get_acpi(irq, acpi_irq);
+}
+#endif
+
UCLASS_DRIVER(irq) = {
.id = UCLASS_IRQ,
.name = "irq",
diff --git a/include/acpi_device.h b/include/acpi_device.h
index acd26c0f54..50ba9b66aa 100644
--- a/include/acpi_device.h
+++ b/include/acpi_device.h
@@ -545,6 +545,33 @@ int acpi_dp_write(struct acpi_ctx *ctx, struct acpi_dp
*table);
int acpi_device_write_gpio_desc(struct acpi_ctx *ctx,
const struct gpio_desc *desc);
+/**
+ * acpi_device_write_interrupt_irq() - Write an interrupt to ACPI
+ *
+ * This creates an interrupt descriptor for an interrupt, including information
+ * ACPI needs to use it.
+ *
+ * @req_irq: Interrupt to write
+ * @return 0 if OK, -ve on error
+ */
+int acpi_device_write_interrupt_irq(struct acpi_ctx *ctx,
+ const struct irq *req_irq);
+
+/**
+ * acpi_device_write_interrupt_or_gpio() - Write interrupt or GPIO to ACPI
+ *
+ * This reads the an interrupt from the device tree, if available. If not it
+ * reads the first GPIO with the name @prop.
+ *
+ * If an interrupt is found, that is written to ACPI. If not, but an GPIO is
+ * found, that is written.
+ *
+ * @return 0 if OK, -ve if neither an interrupt nor a GPIO could be found, or
+ * some other error occurred
+ */
+int acpi_device_write_interrupt_or_gpio(struct acpi_ctx *ctx,
+ struct udevice *dev, const char *prop);
+
/**
* acpi_device_write_i2c_dev() - Write an I2C device to ACPI, including
* information ACPI needs to use it.
diff --git a/include/irq.h b/include/irq.h
index d4948e6dc4..8527e4dd79 100644
--- a/include/irq.h
+++ b/include/irq.h
@@ -8,6 +8,7 @@
#ifndef __irq_H
#define __irq_H
+struct acpi_irq;
struct ofnode_phandle_args;
/*
@@ -26,10 +27,12 @@ enum irq_dev_t {
*
* @dev: IRQ device that handles this irq
* @id: ID to identify this irq with the device
+ * @flags: Flags associated with this interrupt (IRQ_TYPE_...)
*/
struct irq {
struct udevice *dev;
ulong id;
+ ulong flags;
};
/**
@@ -121,10 +124,36 @@ struct irq_ops {
* @return 0 if OK, or a negative error code.
*/
int (*free)(struct irq *irq);
+
+#if CONFIG_IS_ENABLED(ACPIGEN)
+ /**
+ * get_acpi() - Get the ACPI info for an irq
+ *
+ * This converts a irq to an ACPI structure for adding to the ACPI
+ * tables.
+ *
+ * @irq: irq to convert
+ * @acpi_irq: Output ACPI interrupt information
+ * @return ACPI pin number or -ve on error
+ */
+ int (*get_acpi)(const struct irq *irq, struct acpi_irq *acpi_irq);
+#endif
};
#define irq_get_ops(dev) ((struct irq_ops *)(dev)->driver->ops)
+/**
+ * irq_is_valid() - Check if an IRQ is valid
+ *
+ * @irq: IRQ description containing device and ID, e.g. previously
+ * returned by irq_get_by_index()
+ * @return true if valid, false if not
+ */
+static inline bool irq_is_valid(const struct irq *irq)
+{
+ return irq->dev != NULL;
+}
+
/**
* irq_route_pmc_gpio_gpe() - Get the GPIO for an event
*
@@ -225,4 +254,16 @@ int irq_free(struct irq *irq);
*/
int irq_first_device_type(enum irq_dev_t type, struct udevice **devp);
+/**
+ * irq_get_acpi() - Get the ACPI info for an irq
+ *
+ * This converts a irq to an ACPI structure for adding to the ACPI
+ * tables.
+ *
+ * @irq: irq to convert
+ * @acpi_irq: Output ACPI interrupt information
+ * @return ACPI pin number or -ve on error
+ */
+int irq_get_acpi(const struct irq *irq, struct acpi_irq *acpi_irq);
+
#endif
diff --git a/lib/acpi/acpi_device.c b/lib/acpi/acpi_device.c
index adc32f1216..aa5edfe807 100644
--- a/lib/acpi/acpi_device.c
+++ b/lib/acpi/acpi_device.c
@@ -154,6 +154,58 @@ int acpi_device_status(const struct udevice *dev)
return ACPI_STATUS_DEVICE_ALL_ON;
}
+/* ACPI 6.1 section 6.4.3.6: Extended Interrupt Descriptor */
+static int acpi_device_write_interrupt(struct acpi_ctx *ctx,
+ const struct acpi_irq *irq)
+{
+ void *desc_length;
+ u8 flags;
+
+ if (!irq || !irq->pin)
+ return -ENOENT;
+
+ /* This is supported by GpioInt() but not Interrupt() */
+ if (irq->polarity == ACPI_IRQ_ACTIVE_BOTH)
+ return -EINVAL;
+
+ /* Byte 0: Descriptor Type */
+ acpigen_emit_byte(ctx, ACPI_DESCRIPTOR_INTERRUPT);
+
+ /* Byte 1-2: Length (filled in later) */
+ desc_length = acpi_device_write_zero_len(ctx);
+
+ /*
+ * Byte 3: Flags
+ * [7:5]: Reserved
+ * [4]: Wake (0=NO_WAKE 1=WAKE)
+ * [3]: Sharing (0=EXCLUSIVE 1=SHARED)
+ * [2]: Polarity (0=HIGH 1=LOW)
+ * [1]: Mode (0=LEVEL 1=EDGE)
+ * [0]: Resource (0=PRODUCER 1=CONSUMER)
+ */
+ flags = 1 << 0; /* ResourceConsumer */
+ if (irq->mode == ACPI_IRQ_EDGE_TRIGGERED)
+ flags |= 1 << 1;
+ if (irq->polarity == ACPI_IRQ_ACTIVE_LOW)
+ flags |= 1 << 2;
+ if (irq->shared == ACPI_IRQ_SHARED)
+ flags |= 1 << 3;
+ if (irq->wake == ACPI_IRQ_WAKE)
+ flags |= 1 << 4;
+ acpigen_emit_byte(ctx, flags);
+
+ /* Byte 4: Interrupt Table Entry Count */
+ acpigen_emit_byte(ctx, 1);
+
+ /* Byte 5-8: Interrupt Number */
+ acpigen_emit_dword(ctx, irq->pin);
+
+ /* Fill in Descriptor Length (account for len word) */
+ acpi_device_fill_len(ctx, desc_length);
+
+ return 0;
+}
+
/* ACPI 6.1 section 6.4.3.8.1 - GPIO Interrupt or I/O */
int acpi_device_write_gpio(struct acpi_ctx *ctx, const struct acpi_gpio *gpio)
{
@@ -304,6 +356,48 @@ int acpi_device_write_gpio_desc(struct acpi_ctx *ctx,
return 0;
}
+int acpi_device_write_interrupt_irq(struct acpi_ctx *ctx,
+ const struct irq *req_irq)
+{
+ struct acpi_irq irq;
+ int ret;
+
+ ret = irq_get_acpi(req_irq, &irq);
+ if (ret)
+ return log_msg_ret("get", ret);
+ ret = acpi_device_write_interrupt(ctx, &irq);
+ if (ret)
+ return log_msg_ret("write", ret);
+
+ return 0;
+}
+
+int acpi_device_write_interrupt_or_gpio(struct acpi_ctx *ctx,
+ struct udevice *dev, const char *prop)
+{
+ struct irq req_irq;
+ int ret;
+
+ ret = irq_get_by_index(dev, 0, &req_irq);
+ if (!ret) {
+ ret = acpi_device_write_interrupt_irq(ctx, &req_irq);
+ if (ret)
+ return log_msg_ret("irq", ret);
+ } else {
+ struct gpio_desc req_gpio;
+
+ ret = gpio_request_by_name(dev, prop, 0, &req_gpio,
+ GPIOD_IS_IN);
+ if (ret)
+ return log_msg_ret("no gpio", ret);
+ ret = acpi_device_write_gpio_desc(ctx, &req_gpio);
+ if (ret)
+ return log_msg_ret("gpio", ret);
+ }
+
+ return 0;
+}
+
/* ACPI 6.1 section 6.4.3.8.2.1 - I2cSerialBus() */
static void acpi_device_write_i2c(struct acpi_ctx *ctx,
const struct acpi_i2c *i2c)
--
2.25.1.481.gfbce0eb801-goog
