On 2/18/20 8:47 AM, Holger Brunck wrote: > Hi Marek and Wolfgang, > >>> In message <20200217173249.4805-1-ma...@denx.de> you wrote: >>>> >>>> board/keymile/Kconfig | 11 +- >>>> board/keymile/common/ivm.c | 18 +- >>>> board/keymile/secu1/Makefile | 7 + >>>> board/keymile/secu1/qts/iocsr_config.h | 694 >>>> ++++++++++++++++++++++++ board/keymile/secu1/qts/pinmux_config.h >> | 218 ++++++++ >>>> board/keymile/secu1/qts/pll_config.h | 83 +++ >>>> board/keymile/secu1/qts/sdram_config.h | 327 +++++++++++ >>>> board/keymile/secu1/socfpga.c | 67 +++ >>> ... >>>> + select VENDOR_KM >>> >>> Would it make sense to rename keymile -> abb (or abb-ch) here (ditto >>> for KM in the config options / macro names) ? >> >> This is more of a question for Holger, but I agree the renaming should >> eventually happen to align it with current state of things. > > yes I have it on my list to rename this folder to wcom (wiredcom) or > wcom-abb. > But this goes for all the boards in this folder and not only secu. But until > know > I didn't find the right time to do it as we have currently several activities > ongoing for > u-boot (re-aligning other boards and migrating PPC to DTS). > > I assume SECU goes for v2020.07 as we are too late for v2020.04 or? I think > I can > spend some time for the next merge window to tackle this folder issue for all > boards > and then we rebase and adapt this patch.
Boards and drivers which are self-contained can apparently go in even during RC cycle.
