On 2/14/20 4:40 PM, Masahiro Yamada wrote:
> Using the global variable does not look nice.
> 
> Add a new field sthci::align_buffer to point to the bounce buffer.
> 
> Signed-off-by: Masahiro Yamada <yamada.masah...@socionext.com>

Reviewed-by: Jaehoon Chung <jh80.ch...@samsung.com>

Best Regards,
Jaehoon Chung

> ---
> 
> Changes in v3: None
> Changes in v2: None
> 
>  drivers/mmc/sdhci.c | 27 +++++++++++++--------------
>  include/sdhci.h     |  1 +
>  2 files changed, 14 insertions(+), 14 deletions(-)
> 
> diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c
> index 01fa5a9d4d5b..18fbcb5f1864 100644
> --- a/drivers/mmc/sdhci.c
> +++ b/drivers/mmc/sdhci.c
> @@ -16,12 +16,6 @@
>  #include <sdhci.h>
>  #include <dm.h>
>  
> -#if defined(CONFIG_FIXED_SDHCI_ALIGNED_BUFFER)
> -void *aligned_buffer = (void *)CONFIG_FIXED_SDHCI_ALIGNED_BUFFER;
> -#else
> -void *aligned_buffer;
> -#endif
> -
>  static void sdhci_reset(struct sdhci_host *host, u8 mask)
>  {
>       unsigned long timeout;
> @@ -149,9 +143,10 @@ static void sdhci_prepare_dma(struct sdhci_host *host, 
> struct mmc_data *data,
>               if ((host->quirks & SDHCI_QUIRK_32BIT_DMA_ADDR) &&
>                   (host->start_addr & 0x7) != 0x0) {
>                       *is_aligned = 0;
> -                     host->start_addr = (unsigned long)aligned_buffer;
> +                     host->start_addr = (unsigned long)host->align_buffer;
>                       if (data->flags != MMC_DATA_READ)
> -                             memcpy(aligned_buffer, data->src, trans_bytes);
> +                             memcpy(host->align_buffer, data->src,
> +                                    trans_bytes);
>               }
>  
>  #if defined(CONFIG_FIXED_SDHCI_ALIGNED_BUFFER)
> @@ -160,9 +155,9 @@ static void sdhci_prepare_dma(struct sdhci_host *host, 
> struct mmc_data *data,
>                * CONFIG_FIXED_SDHCI_ALIGNED_BUFFER is defined
>                */
>               *is_aligned = 0;
> -             host->start_addr = (unsigned long)aligned_buffer;
> +             host->start_addr = (unsigned long)host->align_buffer;
>               if (data->flags != MMC_DATA_READ)
> -                     memcpy(aligned_buffer, data->src, trans_bytes);
> +                     memcpy(host->align_buffer, data->src, trans_bytes);
>  #endif
>               sdhci_writel(host, host->start_addr, SDHCI_DMA_ADDRESS);
>  
> @@ -381,7 +376,7 @@ static int sdhci_send_command(struct mmc *mmc, struct 
> mmc_cmd *cmd,
>       if (!ret) {
>               if ((host->quirks & SDHCI_QUIRK_32BIT_DMA_ADDR) &&
>                               !is_aligned && (data->flags == MMC_DATA_READ))
> -                     memcpy(data->dest, aligned_buffer, trans_bytes);
> +                     memcpy(data->dest, host->align_buffer, trans_bytes);
>               return 0;
>       }
>  
> @@ -630,14 +625,18 @@ static int sdhci_init(struct mmc *mmc)
>  
>       sdhci_reset(host, SDHCI_RESET_ALL);
>  
> -     if ((host->quirks & SDHCI_QUIRK_32BIT_DMA_ADDR) && !aligned_buffer) {
> -             aligned_buffer = memalign(8, 512*1024);
> -             if (!aligned_buffer) {
> +#if defined(CONFIG_FIXED_SDHCI_ALIGNED_BUFFER)
> +     host->align_buffer = (void *)CONFIG_FIXED_SDHCI_ALIGNED_BUFFER;
> +#else
> +     if (host->quirks & SDHCI_QUIRK_32BIT_DMA_ADDR) {
> +             host->align_buffer = memalign(8, 512 * 1024);
> +             if (!host->align_buffer) {
>                       printf("%s: Aligned buffer alloc failed!!!\n",
>                              __func__);
>                       return -ENOMEM;
>               }
>       }
> +#endif
>  
>       sdhci_set_power(host, fls(mmc->cfg->voltages) - 1);
>  
> diff --git a/include/sdhci.h b/include/sdhci.h
> index 01addb7a6036..1358218270b8 100644
> --- a/include/sdhci.h
> +++ b/include/sdhci.h
> @@ -321,6 +321,7 @@ struct sdhci_host {
>       uint    voltages;
>  
>       struct mmc_config cfg;
> +     void *align_buffer;
>       dma_addr_t start_addr;
>       int flags;
>  #define USE_SDMA     (0x1 << 0)
> 

Reply via email to