Thanks for the fast answer, Stefan.
On 2/11/20 12:16 PM, Stefan wrote:
> Hi Mauro,
> ===8<----
>>> https://gitlab.denx.de/u-boot/custodians/u-boot-mips/commits/testing
>> I tried to use this repo/branch, but something is wrong (or I goofed
>> badly).
>
> Just a quick reply: I tested u-boot-mips/testing today and it works just
> fine on both LinkIt and the GARDENA board. So there is nothing wrong
> with this repository AFAICT.
Suspect is there's something wrong with handling of SPL_UART2_SPIS_PINMUX
(that's where our boards are different), but I couldn't spot any relevant
difference.
> You might need to rebase your patch on top of this branch, as some files
> might have changes in the meantime.
What is the recommended procedure, in this case?
I did a:
git format-patch --full-index -o ../transport weijie.v3
on old branch ("weijie.v3" is the branch on which I added Weijie's patches,
of course), an then I tried simply (on u-boot-mips):
git checkout -b vocore2 testing
git am -3 ../transport/*
>
> Thanks,
> Stefan
> ===8<----
Regards
Mauro
