On Mon, Jan 27, 2020 at 10:07:31AM +0530, Keerthy wrote:
>
>
> On 24/01/20 8:25 pm, Tom Rini wrote:
> > On Wed, Jan 22, 2020 at 09:30:01AM +0530, Keerthy wrote:
> > > Add fs_loader node which will be needed for loading firmwares
> > > from the boot media/filesystem.
> > >
> > > Signed-off-by: Keerthy <j-keer...@ti.com>
> > > Signed-off-by: Lokesh Vutla <lokeshvu...@ti.com>
> > > ---
> > > arch/arm/dts/k3-j721e-r5-common-proc-board.dts | 6 ++++++
> > > 1 file changed, 6 insertions(+)
> > >
> > > diff --git a/arch/arm/dts/k3-j721e-r5-common-proc-board.dts
> > > b/arch/arm/dts/k3-j721e-r5-common-proc-board.dts
> > > index 28a355d49c..caeee8defe 100644
> > > --- a/arch/arm/dts/k3-j721e-r5-common-proc-board.dts
> > > +++ b/arch/arm/dts/k3-j721e-r5-common-proc-board.dts
> > > @@ -18,6 +18,12 @@
> > > chosen {
> > > stdout-path = "serial2:115200n8";
> > > tick-timer = &timer1;
> > > + firmware-loader = &fs_loader0;
> > > + };
> > > +
> > > + fs_loader0: fs_loader@0 {
> > > + u-boot,dm-pre-reloc;
> > > + compatible = "u-boot,fs-loader";
> > > };
> > > a72_0: a72@0 {
> >
> > All u-boot, properties need to be in a -u-boot.dtsi file so it's very
> > clear what things we are adding and what files can be replaced directly
> > from Linux. Please fixup anything else in this area that wasn't already
> > doing this and then add what you need here, thanks!
>
> Tom,
>
> I believe we are safe here as the k3-j721e-r5-common-proc-board.dts entire
> file is u-boot specific. k3-j721e-r5-common-proc-board.dts is not present in
> Linux DT.Perhaps something is out of sync as we have both k3-j721e-common-proc-board.dts and k3-j721e-common-proc-board-u-boot.dtsi which leads me to believe that the former just hasn't made its way upstream yet. Thanks! -- Tom
signature.asc
Description: PGP signature
