[PATCH 3/7] arm: dts: k3-j721e-common-proc-board: Enable USB0 in peripheral mode

[Vignesh Raghavendra]

Enable USB0 in peripheral mode so that it be used for DFU

Signed-off-by: Vignesh Raghavendra <vigne...@ti.com>
---
 arch/arm/dts/k3-j721e-r5-common-proc-board.dts | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/arch/arm/dts/k3-j721e-r5-common-proc-board.dts 
b/arch/arm/dts/k3-j721e-r5-common-proc-board.dts
index 28a355d49c9b..585cc839632b 100644
--- a/arch/arm/dts/k3-j721e-r5-common-proc-board.dts
+++ b/arch/arm/dts/k3-j721e-r5-common-proc-board.dts
@@ -40,6 +40,13 @@
                clock-frequency = <200000000>;
                u-boot,dm-spl;
        };
+
+       clk_19_2mhz: dummy_clock {
+               compatible = "fixed-clock";
+               #clock-cells = <0>;
+               clock-frequency = <19200000>;
+               u-boot,dm-spl;
+       };
 };
 
 &cbass_mcu_wakeup {
@@ -207,4 +214,15 @@
        u-boot,dm-spl;
 };
 
+&usbss0 {
+       /delete-property/ power-domains;
+       /delete-property/ assigned-clocks;
+       /delete-property/ assigned-clock-parents;
+       clocks = <&clk_19_2mhz>;
+       clock-names = "usb2_refclk";
+       pinctrl-names = "default";
+       pinctrl-0 = <&main_usbss0_pins_default>;
+       ti,vbus-divider;
+};
+
 #include "k3-j721e-common-proc-board-u-boot.dtsi"
-- 
2.25.0