Implement the method that converts a GPIO into the form used by ACPI, so that GPIOs can be added to ACPI tables.
Signed-off-by: Simon Glass <s...@chromium.org> --- drivers/gpio/intel_gpio.c | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) diff --git a/drivers/gpio/intel_gpio.c b/drivers/gpio/intel_gpio.c index c56b362c4e..51ea23df89 100644 --- a/drivers/gpio/intel_gpio.c +++ b/drivers/gpio/intel_gpio.c @@ -4,6 +4,7 @@ */ #include <common.h> +#include <acpi_device.h> #include <dm.h> #include <errno.h> #include <fdtdec.h> @@ -127,6 +128,33 @@ static int intel_gpio_xlate(struct udevice *orig_dev, struct gpio_desc *desc, return 0; } +#if CONFIG_IS_ENABLED(ACPIGEN) +static int intel_gpio_get_acpi(const struct gpio_desc *desc, + struct acpi_gpio *gpio) +{ + struct udevice *pinctrl; + int ret; + + if (!dm_gpio_is_valid(desc)) + return -ENOENT; + pinctrl = dev_get_parent(desc->dev); + + memset(gpio, '\0', sizeof(*gpio)); + + gpio->type = ACPI_GPIO_TYPE_IO; + gpio->pull = ACPI_GPIO_PULL_DEFAULT; + gpio->io_restrict = ACPI_GPIO_IO_RESTRICT_OUTPUT; + gpio->polarity = ACPI_GPIO_ACTIVE_HIGH; + gpio->pin_count = 1; + gpio->pins[0] = intel_pinctrl_get_acpi_pin(pinctrl, desc->offset); + ret = acpi_device_path(pinctrl, gpio->resource, sizeof(gpio->resource)); + if (ret) + return log_msg_ret("resource", ret); + + return 0; +} +#endif + static int intel_gpio_probe(struct udevice *dev) { return 0; @@ -151,6 +179,9 @@ static const struct dm_gpio_ops gpio_intel_ops = { .set_value = intel_gpio_set_value, .get_function = intel_gpio_get_function, .xlate = intel_gpio_xlate, +#if CONFIG_IS_ENABLED(ACPIGEN) + .get_acpi = intel_gpio_get_acpi, +#endif }; static const struct udevice_id intel_intel_gpio_ids[] = { -- 2.25.0.341.g760bfbb309-goog