The zynq architecture depends on SPL_STACK_R_ADDR to be set, and thus it
makes sense for the ARCH_ZYNQ to depend on SPL_STACK_R. Further more
that address needs to have a sane default. So lets follow the OMAP2PLUS
and set a default for the Zynq as well.
Signed-off-by: Olliver Schinagl <oli...@schinagl.nl>
---
arch/arm/Kconfig | 1 +
common/spl/Kconfig | 1 +
2 files changed, 2 insertions(+)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index a623ef5743..413b3e3a6e 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1046,6 +1046,7 @@ config ARCH_ZYNQ
select SPL_DM if SPL
select SPL_OF_CONTROL if SPL
select SPL_SEPARATE_BSS if SPL
+ select SPL_STACK_R if SPL
select SUPPORT_SPL
imply ARCH_EARLY_INIT_R
imply BOARD_LATE_INIT
diff --git a/common/spl/Kconfig b/common/spl/Kconfig
index 76f39dc04f..cdebc62d0f 100644
--- a/common/spl/Kconfig
+++ b/common/spl/Kconfig
@@ -244,6 +244,7 @@ config SPL_STACK_R_ADDR
depends on SPL_STACK_R
hex "SDRAM location for SPL stack"
default 0x82000000 if ARCH_OMAP2PLUS
+ default 0x200000 if ARCH_ZYNQ
help
Specify the address in SDRAM for the SPL stack. This will be set up
before board_init_r() is called.
--
2.20.1
