Remove the define GPIOD_REQUESTED as it is never used
and use BIT() macro for other defines.
Signed-off-by: Patrick Delaunay <patrick.delau...@st.com>
---
Changes in v3: None
Changes in v2:
- remove the unused GPIOD_REQUESTED
include/asm-generic/gpio.h | 9 ++++-----
1 file changed, 4 insertions(+), 5 deletions(-)
diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h
index d6cf18744f..7da2015805 100644
--- a/include/asm-generic/gpio.h
+++ b/include/asm-generic/gpio.h
@@ -117,11 +117,10 @@ struct udevice;
struct gpio_desc {
struct udevice *dev; /* Device, NULL for invalid GPIO */
unsigned long flags;
-#define GPIOD_REQUESTED (1 << 0) /* Requested/claimed */
-#define GPIOD_IS_OUT (1 << 1) /* GPIO is an output */
-#define GPIOD_IS_IN (1 << 2) /* GPIO is an input */
-#define GPIOD_ACTIVE_LOW (1 << 3) /* value has active low */
-#define GPIOD_IS_OUT_ACTIVE (1 << 4) /* set output active */
+#define GPIOD_IS_OUT BIT(1) /* GPIO is an output */
+#define GPIOD_IS_IN BIT(2) /* GPIO is an input */
+#define GPIOD_ACTIVE_LOW BIT(3) /* value has active low */
+#define GPIOD_IS_OUT_ACTIVE BIT(4) /* set output active */
uint offset; /* GPIO offset within the device */
/*
--
2.17.1
