Hi Tom,
thanks a lot for your quick reply.
On 06.01.2020 22:07, Tom Rini wrote:
On Mon, Jan 06, 2020 at 09:58:47PM +0100, Stefan Bosch wrote:
This patch adds support for SAMSUNG's ARM Cortex-A9 based S5P4418 SoC,
especially FriendlyARM's NanoPi2 and NanoPC-T2 boards. It is based on
https://github.com/friendlyarm/u-boot/tree/nanopi2-v2016.01. For
v2016.01 I
have also made a working SPL (FriendlyARM U-Boot is using a closed
source
2nd-bootloader). My plan is to migrate this also to the current
U-Boot.
Issues:
Please send me a value for "#define MACH_TYPE_S5P4418" for
arch/arm/include/asm/mach-types.h.
Do you really need to support non-DT kernels?
I have adopted this from the original Code. What is the alternative?
Could you please give me more details (e.g. an example-board).
The size of the patch is over 700kB, so I will upload it on
http://www.denx.de/wiki/attach/U-Boot/TooBigPatches if not otherwise
instructed.
Ah, I would suggest splitting things up into smaller logical chunks (a
patch per driver, separate SoC from board, etc) so they're all able to
make it to patchwork, thanks!
Ok, I will try to split the patch into chunks <= 100kB without loosing
the logic ;-)
Regards,
Stefan
