On Thu 26 Dec 2019 at 12:33, Anand Moon <linux.am...@gmail.com> wrote:
> As per mainline line kernel fix the clk tunnig phase for > mmc, set Core=180, Tx=0, Rx=0 clk phase for mmc initialization. > > Signed-off-by: Anand Moon <linux.am...@gmail.com> > --- > Changes from previous > v2: Fix the clk phase macro to support PHASE_180 > drop the wrong CLK_CORE_PHASE_MASK macro. > > v1: use the mainline kernel tuning for clk tuning. > Fixed the commmit messages. > Patch v1: > https://patchwork.ozlabs.org/patch/1201208/ > > Before these changes. > clock is enabled (380953Hz) > clock is enabled (25000000Hz) > After these changes > clock is enabled (380953Hz) > clock is enabled (25000000Hz) > clock is enabled (52000000Hz) > Test on Odroid N2 and Odroid C2 with eMMC and microSD cards > --- > arch/arm/include/asm/arch-meson/sd_emmc.h | 14 ++++++-------- > drivers/mmc/meson_gx_mmc.c | 9 +++++---- > 2 files changed, 11 insertions(+), 12 deletions(-) > > diff --git a/arch/arm/include/asm/arch-meson/sd_emmc.h > b/arch/arm/include/asm/arch-meson/sd_emmc.h > index e3a72c8b66..ee20c009e2 100644 > --- a/arch/arm/include/asm/arch-meson/sd_emmc.h > +++ b/arch/arm/include/asm/arch-meson/sd_emmc.h > @@ -7,6 +7,7 @@ > #define __SD_EMMC_H__ > > #include <mmc.h> > +#include <linux/bitops.h> > > #define SDIO_PORT_A 0 > #define SDIO_PORT_B 1 > @@ -19,14 +20,11 @@ > #define CLK_MAX_DIV 63 > #define CLK_SRC_24M (0 << 6) > #define CLK_SRC_DIV2 (1 << 6) > -#define CLK_CO_PHASE_000 (0 << 8) > -#define CLK_CO_PHASE_090 (1 << 8) > -#define CLK_CO_PHASE_180 (2 << 8) > -#define CLK_CO_PHASE_270 (3 << 8) > -#define CLK_TX_PHASE_000 (0 << 10) > -#define CLK_TX_PHASE_090 (1 << 10) > -#define CLK_TX_PHASE_180 (2 << 10) > -#define CLK_TX_PHASE_270 (3 << 10) > + > +#define CLK_PHASE_180 2 > +#define CLK_TX_PHASE_MASK GENMASK(11, 10) > +#define CLK_RX_PHASE_MASK GENMASK(13, 12) > + > #define CLK_ALWAYS_ON BIT(24) > > #define MESON_SD_EMMC_CFG 0x44 > diff --git a/drivers/mmc/meson_gx_mmc.c b/drivers/mmc/meson_gx_mmc.c > index 86c1a7164a..ad697d3a5e 100644 > --- a/drivers/mmc/meson_gx_mmc.c > +++ b/drivers/mmc/meson_gx_mmc.c > @@ -52,10 +52,11 @@ static void meson_mmc_config_clock(struct mmc *mmc) > clk_div = DIV_ROUND_UP(clk, mmc->clock); > > /* 180 phase core clock */ > - meson_mmc_clk |= CLK_CO_PHASE_180; > - > - /* 180 phase tx clock */ > - meson_mmc_clk |= CLK_TX_PHASE_000; > + meson_mmc_clk |= CLK_PHASE_180; > + /* 000 phase rx clock */ > + meson_mmc_clk |= CLK_RX_PHASE_MASK; > + /* 000 phase tx clock */ > + meson_mmc_clk |= CLK_TX_PHASE_MASK; The comment on your previous version seemed correct but I think what you have implemented here is still not doing what you expect. > > /* clock settings */ > meson_mmc_clk |= clk_src;
