On Monday 19 July 2010 14:24:22 Stefan Roese wrote: > This patch fixes some problems for the T3CORP board. Here the list > of the changes: > > - Add 600-67 and 677 CPU frequency setting to chip_config > command > - Define CONFIG_DDR_RFDC_FIXED on t3corp: > While using the "normal" auto calibration code, sometimes values for > RFDC were picked (>= T3) that resulted in a non-working U-Boot (hang > upon relocation, while running from SDRAM). With this optimized RFDC > value we can force this register and use the auto-calibration code to > setup the remaining calibration registers. > - Increase sizes of FPGA chips selects > - EBC timing updated OEN=3 for 66 MHz EBC speed > - Change ext. IRQ2 setup to level-low active > - Enable CONFIG_SYS_CFI_FLASH_STATUS_POLL
Applied to u-boot-ppc4xx/master. Thanks. Cheers, Stefan -- DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: off...@denx.de _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
