Slim Bootloader provides serial port info in its HOB to support
both IO or MMIO serial ports, but it's controlled by SYS_NS16550_MEM32
or SYS_NS16550_PORT_MAPPED in U-Boot.
To support both serial port configurations dynamically at runtime,
Slim Bootloader serial driver leverages NS16550_DYNAMIC.
Signed-off-by: Aiden Park <aiden.p...@intel.com>
---
arch/x86/cpu/slimbootloader/serial.c | 5 +++++
include/configs/slimbootloader.h | 13 -------------
2 files changed, 5 insertions(+), 13 deletions(-)
diff --git a/arch/x86/cpu/slimbootloader/serial.c
b/arch/x86/cpu/slimbootloader/serial.c
index 7b44a59bff..0f45b3ba72 100644
--- a/arch/x86/cpu/slimbootloader/serial.c
+++ b/arch/x86/cpu/slimbootloader/serial.c
@@ -45,7 +45,12 @@ static int slimbootloader_serial_ofdata_to_platdata(struct
udevice *dev)
plat->base = data->base;
/* ns16550 uses reg_shift, then covert stride to shift */
plat->reg_shift = data->stride >> 1;
+ plat->reg_width = data->stride;
plat->clock = data->clk;
+ plat->fcr = UART_FCR_DEFVAL;
+ plat->flags = 0;
+ if (data->type == 1)
+ plat->flags |= NS16550_FLAG_IO;
return 0;
}
diff --git a/include/configs/slimbootloader.h b/include/configs/slimbootloader.h
index e0011ed446..b8169072cc 100644
--- a/include/configs/slimbootloader.h
+++ b/include/configs/slimbootloader.h
@@ -8,19 +8,6 @@
#include <configs/x86-common.h>
-/*
- * By default, CONFIG_SYS_NS16550_PORT_MAPPED is enabled for port io serial.
- * To use mmio base serial, enable CONFIG_SYS_NS16550_MEM32 and disable
- * CONFIG_SYS_NS16550_PORT_MAPPED until ns16550 driver supports serial port
- * configuration in run-time.
- *
- * #define CONFIG_SYS_NS16550_MEM32
- * #undef CONFIG_SYS_NS16550_PORT_MAPPED
- */
-#ifdef CONFIG_SYS_NS16550_MEM32
-#undef CONFIG_SYS_NS16550_PORT_MAPPED
-#endif
-
#define CONFIG_STD_DEVICES_SETTINGS \
"stdin=serial,i8042-kbd,usbkbd\0" \
"stdout=serial\0" \
--
2.20.1
