Add a new option to enable the DROP_FFS flag when flashing UBI images to
NAND in order to drop trailing all-0xff pages.

This is similar to the existing FASTBOOT_FLASH_NAND_TRIMFFS option.

Signed-off-by: Guillermo Rodriguez <guille.rodrig...@gmail.com>
Cc: Lukasz Majewski <lu...@denx.de>
---
 drivers/dfu/Kconfig    | 7 +++++++
 drivers/dfu/dfu_nand.c | 7 ++++++-
 2 files changed, 13 insertions(+), 1 deletion(-)

diff --git a/drivers/dfu/Kconfig b/drivers/dfu/Kconfig
index 75fe0a12c6..5573f5e9cc 100644
--- a/drivers/dfu/Kconfig
+++ b/drivers/dfu/Kconfig
@@ -36,6 +36,13 @@ config DFU_NAND
          This option enables using DFU to read and write to NAND based
          storage.
 
+config DFU_NAND_TRIMFFS
+       bool "Skip empty pages when flashing UBI images to NAND"
+       depends on DFU_NAND
+       help
+         When flashing UBI images to NAND, enable the DROP_FFS flag to drop
+         trailing all-0xff pages.
+
 config DFU_RAM
        bool "RAM back end for DFU"
        help
diff --git a/drivers/dfu/dfu_nand.c b/drivers/dfu/dfu_nand.c
index b812a3dfb1..58b94348c9 100644
--- a/drivers/dfu/dfu_nand.c
+++ b/drivers/dfu/dfu_nand.c
@@ -50,6 +50,7 @@ static int nand_block_op(enum dfu_op op, struct dfu_entity 
*dfu,
                                         lim, buf);
        } else {
                nand_erase_options_t opts;
+               int write_flags = WITH_WR_VERIFY;
 
                memset(&opts, 0, sizeof(opts));
                opts.offset = start;
@@ -62,8 +63,12 @@ static int nand_block_op(enum dfu_op op, struct dfu_entity 
*dfu,
                if (ret)
                        return ret;
                /* then write */
+#ifdef CONFIG_DFU_NAND_TRIMFFS
+               if (dfu->data.nand.ubi)
+                       write_flags |= WITH_DROP_FFS;
+#endif
                ret = nand_write_skip_bad(mtd, start, &count, &actual,
-                                         lim, buf, WITH_WR_VERIFY);
+                                         lim, buf, write_flags);
        }
 
        if (ret != 0) {
-- 
2.21.0

Reply via email to