Hi Michael, On Sun, Oct 27, 2019 at 3:38 PM Michael Walle <mich...@walle.cc> wrote: > > The network driver has to set the PHY node correctly. If that is not the > case, ar803x_of_init() will fail. Add some debugging output. > > If the device tree binding is not working for you have a look at the > ar803x_of_init: found PHY node: phy@0 > output. In the case above "phy@0" is the phy node in the device tree. If > instead the node of your network device is displayed, you have to set > the phydev->node property in your network device driver. For example, > the following patch adds it to the fsl_enetc driver: > https://patchwork.ozlabs.org/patch/1184523/ > > Signed-off-by: Michael Walle <mich...@walle.cc>
This doesn't apply so I assume it's either superseded or not needed any more. If those are not the case, please rebase and resend on top of u-boot-net/master Thanks, -Joe
