Changes since v2: * drop "sunxi: board: Use eth_env_set_enetaddr_by_index()" as it breaks compilation without CONFIG_NET * add "sunxi: board: extract creating a unique sid into a helper function" and use it for the the bdaddr so that it work without ethernet devices * use `if (CONFIG_FIXUP_BDADDR[0])` as suggested by Ondřej to give the compiler a better chance of discarding the function if the knob isn't set
Changes since v1: * add CONFIG_FIXUP_BDADDR so fixing up a bdaddr is reusable * try to use "bdaddr" first, then fall back to generating an address Notes: * the kernel patch for btbcm to accept the "local-bd-address" property is on master and will be in v5.5-rc1 Andre Heider (4): sunxi: board: extract creating a unique sid into a helper function arm: sunxi: add a config option to fixup a Bluetooth address arm64: dts: sync Allwinner H6 files arm64: dts: sun50i: Add support for Orange Pi 3 arch/arm/dts/Makefile | 1 + arch/arm/dts/sun50i-h6-beelink-gs1.dts | 27 +++ arch/arm/dts/sun50i-h6-orangepi-3.dts | 287 +++++++++++++++++++++++++ arch/arm/dts/sun50i-h6-orangepi.dtsi | 4 + arch/arm/dts/sun50i-h6-pine-h64.dts | 4 + arch/arm/dts/sun50i-h6.dtsi | 137 ++++++++++-- arch/arm/mach-sunxi/Kconfig | 11 + board/sunxi/MAINTAINERS | 5 + board/sunxi/board.c | 139 ++++++++---- configs/orangepi_3_defconfig | 18 ++ 10 files changed, 569 insertions(+), 64 deletions(-) create mode 100644 arch/arm/dts/sun50i-h6-orangepi-3.dts create mode 100644 configs/orangepi_3_defconfig -- 2.24.0 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
