On 25/11/19 8:26 PM, Caleb Robey wrote: > BeagleBoard.org BeagleBone AI rev A1 does not include a board > identifier I2C EEPROM due to a design oversight. These boards have > been put into production and are generally available now. > > The board identifier information, however, has been included in the > second eMMC linear boot partition (/dev/mmcblk1boot1). > > This patch works by: > * First, looking for a board identifier I2C EEPROM and if not found, > * Then seeing if the boot mode matches BeagleBone AI with eMMC in the > boot chain to make sure we don't enable eMMC pinmuxes on boards > that don't support it, and > * Finally, initializes the eMMC pins and reading the header. > > Signed-off-by: Jason Kridner <j...@ti.com> > Signed-off-by: Caleb Robey <c-ro...@ti.com> > Cc: Robert Nelson <robertcnel...@gmail.com>
Reviewed-by: Lokesh Vutla <lokeshvu...@ti.com> Thanks and regards, Lokesh _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
