Hi Joris, On Sun, Nov 24, 2019 at 5:06 PM Joris Offouga <offougajo...@gmail.com> wrote: > > Anatolij, Fabio > > > I just compiled a fresh U-Boot with U-Boot master and It looks > like commit f0b54d (video: mxsfb: Configure the clock after eLCDIF > reset") [1] > breaks my Pico-imx7d and imx7d-Sabre. > see logs after: > > U-Boot 2020.01-rc3-00489-g47b48fe186 (Nov 24 2019 - 15:18:23 +0100) > > CPU: Freescale i.MX7D rev1.2 1000 MHz (running at 792 MHz) > CPU: Commercial temperature grade (0C to 95C) at 36C > Reset cause: POR > Model: Freescale i.MX7 SabreSD Board > Board: i.MX7D SABRESD in secure mode > DRAM: 1 GiB > MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 > Loading Environment from MMC... OK > Video: 480x272x24 > > After revert it : > > U-Boot 2020.01-rc3-00490-g6bebc83c0a (Nov 24 2019 - 15:51:16 +0100) > > CPU: Freescale i.MX7D rev1.2 1000 MHz (running at 792 MHz) > CPU: Commercial temperature grade (0C to 95C) at 36C > Reset cause: POR > Model: Freescale i.MX7 SabreSD Board > Board: i.MX7D SABRESD in secure mode > DRAM: 1 GiB > MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 > Loading Environment from MMC... OK > Video: 480x272x24 > In: serial > Out: serial > Err: serial > Net: FEC0 > Hit any key to stop autoboot: 0 > > So, can you consider this commit 'not applicable' for next release ?
Thanks. Let me send a revert. _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot