From: Bartosz Golaszewski <bgolaszew...@baylibre.com>
We don't have full device-tree support in SPL yet - add an appropriate
U_BOOT_DEVICE() to the board file.
Signed-off-by: Bartosz Golaszewski <bgolaszew...@baylibre.com>
---
arch/arm/mach-davinci/Kconfig | 1 +
board/davinci/da8xxevm/omapl138_lcdk.c | 9 +++++++++
2 files changed, 10 insertions(+)
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index adc50922c8..8a81c07881 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -14,6 +14,7 @@ config TARGET_OMAPL138_LCDK
bool "OMAPL138 LCDK"
select SOC_DA8XX
select SUPPORT_SPL
+ select SPL_BOARD_INIT
config TARGET_LEGOEV3
bool "LEGO MINDSTORMS EV3"
diff --git a/board/davinci/da8xxevm/omapl138_lcdk.c
b/board/davinci/da8xxevm/omapl138_lcdk.c
index d4cda0a8a7..608a7f28eb 100644
--- a/board/davinci/da8xxevm/omapl138_lcdk.c
+++ b/board/davinci/da8xxevm/omapl138_lcdk.c
@@ -366,4 +366,13 @@ U_BOOT_DEVICE(omapl138_uart) = {
.name = "ns16550_serial",
.platdata = &serial_pdata,
};
+
+U_BOOT_DEVICE(omapl138_mmc) = {
+ .name = "davinci_mmc",
+};
+
+void spl_board_init(void)
+{
+ davinci_configure_pin_mux(mmc0_pins, ARRAY_SIZE(mmc0_pins));
+}
#endif
--
2.23.0
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
