This adds pfe stop command before enter linux kernel
to fix a problem that ethernet won't be workable
after enter linux
Why need execute the command before enter
linux kernel?
- There is a h/w limitation in LS1012A PFE, to
re-initialize PFE it has to be safe shutdown,
these steps are done through PFE stop.
Signed-off-by: Biwen Li <biwen...@nxp.com>
---
Changes in v2:
- trim subject
- add why
include/configs/ls1012a2g5rdb.h | 2 +-
include/configs/ls1012afrdm.h | 2 +-
include/configs/ls1012afrwy.h | 4 ++--
include/configs/ls1012ardb.h | 2 +-
4 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/include/configs/ls1012a2g5rdb.h b/include/configs/ls1012a2g5rdb.h
index cb329385d9..5943b69716 100644
--- a/include/configs/ls1012a2g5rdb.h
+++ b/include/configs/ls1012a2g5rdb.h
@@ -85,7 +85,7 @@
"installer=load mmc 0:2 $load_addr " \
"/flex_installer_arm64.itb; " \
"bootm $load_addr#$board\0" \
- "qspi_bootcmd=echo Trying load from qspi..;" \
+ "qspi_bootcmd=pfe stop; echo Trying load from qspi..;" \
"sf probe && sf read $load_addr " \
"$kernel_addr $kernel_size; env exists secureboot " \
"&& sf read $kernelheader_addr_r $kernelheader_addr " \
diff --git a/include/configs/ls1012afrdm.h b/include/configs/ls1012afrdm.h
index 8c7d4e558d..8a3ebf06f2 100644
--- a/include/configs/ls1012afrdm.h
+++ b/include/configs/ls1012afrdm.h
@@ -60,7 +60,7 @@
"installer=load usb 0:2 $load_addr " \
"/flex_installer_arm64.itb; " \
"bootm $load_addr#$board\0" \
- "qspi_bootcmd=echo Trying load from qspi..;" \
+ "qspi_bootcmd=pfe stop; echo Trying load from qspi..;" \
"sf probe && sf read $load_addr " \
"$kernel_addr $kernel_size && bootm $load_addr#$board\0"
diff --git a/include/configs/ls1012afrwy.h b/include/configs/ls1012afrwy.h
index 1b0f1566d3..a2ca326cfc 100644
--- a/include/configs/ls1012afrwy.h
+++ b/include/configs/ls1012afrwy.h
@@ -109,13 +109,13 @@
"installer=load mmc 0:2 $load_addr " \
"/flex_installer_arm64.itb; " \
"bootm $load_addr#$board\0" \
- "qspi_bootcmd=echo Trying load from qspi..;" \
+ "qspi_bootcmd=pfe stop; echo Trying load from qspi..;" \
"sf probe && sf read $load_addr " \
"$kernel_addr $kernel_size; env exists secureboot " \
"&& sf read $kernelheader_addr_r $kernelheader_addr " \
"$kernelheader_size && esbc_validate ${kernelheader_addr_r}; " \
"bootm $load_addr#$board\0" \
- "sd_bootcmd=echo Trying load from sd card..;" \
+ "sd_bootcmd=pfe stop; echo Trying load from sd card..;" \
"mmcinfo; mmc read $load_addr " \
"$kernel_addr_sd $kernel_size_sd ;" \
"env exists secureboot && mmc read $kernelheader_addr_r "\
diff --git a/include/configs/ls1012ardb.h b/include/configs/ls1012ardb.h
index a5e27404f8..39166fea7d 100644
--- a/include/configs/ls1012ardb.h
+++ b/include/configs/ls1012ardb.h
@@ -109,7 +109,7 @@
"installer=load mmc 0:2 $load_addr " \
"/flex_installer_arm64.itb; " \
"bootm $load_addr#$board\0" \
- "qspi_bootcmd=echo Trying load from qspi..;" \
+ "qspi_bootcmd=pfe stop; echo Trying load from qspi..;" \
"sf probe && sf read $load_addr " \
"$kernel_addr $kernel_size; env exists secureboot " \
"&& sf read $kernelheader_addr_r $kernelheader_addr " \
--
2.17.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
