From: Vipin KUMAR <vipin.ku...@st.com> This patch adds the support for high speed in usb device framework and usbtty driver. This feature has been kept within a macro CONFIG_USBD_HS, so the board configuration files have to define this macro to enable high speed support.
Along with that specific peripheral drivers also need to define a function to let the framework know that the enumeration has happened at high speed. This function prototype is "int is_usbd_high_speed(void)" Signed-off-by: Vipin Kumar <vipin.ku...@st.com> --- Makefile | 12 ++++++++---- 1 files changed, 8 insertions(+), 4 deletions(-) diff --git a/Makefile b/Makefile index ffd4fc1..870207d 100644 --- a/Makefile +++ b/Makefile @@ -2090,22 +2090,26 @@ omap730p2_cs3boot_config : unconfig spear300_config \ spear300_nand_config \ spear300_usbtty_config \ -spear300_usbtty_nand_config \ +spear300_usbtty_nand_config : unconfig + @$(MKCONFIG) -n $@ -t $(@:_config=) spear3xx_evb arm arm926ejs spear300 spear spear + spear310_config \ spear310_nand_config \ spear310_usbtty_config \ -spear310_usbtty_nand_config \ +spear310_usbtty_nand_config : unconfig + @$(MKCONFIG) -n $@ -t $(@:_config=) spear3xx_evb arm arm926ejs spear310 spear spear + spear320_config \ spear320_nand_config \ spear320_usbtty_config \ spear320_usbtty_nand_config : unconfig - @$(MKCONFIG) -n $@ -t $@ spear3xx_evb arm arm926ejs $(@:_config=) spear spear + @$(MKCONFIG) -n $@ -t $@ spear3xx_evb arm arm926ejs spear320 spear spear spear600_config \ spear600_nand_config \ spear600_usbtty_config \ spear600_usbtty_nand_config : unconfig - @$(MKCONFIG) -n $@ -t $@ spear6xx_evb arm arm926ejs $(@:_config=) spear spear + @$(MKCONFIG) -n $@ -t $@ spear6xx_evb arm arm926ejs spear600 spear spear spear1300_config \ spear1300_nand_config \ -- 1.6.0.2 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
