From: Suneel Garapati <sgarap...@marvell.com>
Adds support for GPIO controllers found on OcteonTX or
OcteonTX2 SoC platforms.
Signed-off-by: Aaron Williams <awilli...@marvell.com>
Signed-off-by: Suneel Garapati <sgarap...@marvell.com>
---
drivers/gpio/Kconfig | 7 ++
drivers/gpio/Makefile | 1 +
drivers/gpio/octeontx_gpio.c | 218 +++++++++++++++++++++++++++++++++++
3 files changed, 226 insertions(+)
create mode 100644 drivers/gpio/octeontx_gpio.c
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index c1ad5d64a3..91265180d3 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -276,6 +276,13 @@ config PIC32_GPIO
help
Say yes here to support Microchip PIC32 GPIOs.
+config OCTEONTX_GPIO
+ bool "OcteonTX GPIO driver"
+ depends on DM_GPIO && (ARCH_OCTEONTX || ARCH_OCTEONTX2)
+ default y
+ help
+ Say yes here to support OcteonTX GPIOs.
+
config STM32_GPIO
bool "ST STM32 GPIO driver"
depends on DM_GPIO && (STM32 || ARCH_STM32MP)
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index ccc49e2eb0..d7651bff4b 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -55,6 +55,7 @@ obj-$(CONFIG_HIKEY_GPIO) += hi6220_gpio.o
obj-$(CONFIG_HSDK_CREG_GPIO) += hsdk-creg-gpio.o
obj-$(CONFIG_IMX_RGPIO2P) += imx_rgpio2p.o
obj-$(CONFIG_PIC32_GPIO) += pic32_gpio.o
+obj-$(CONFIG_OCTEONTX_GPIO) += octeontx_gpio.o
obj-$(CONFIG_MVEBU_GPIO) += mvebu_gpio.o
obj-$(CONFIG_MSM_GPIO) += msm_gpio.o
obj-$(CONFIG_$(SPL_)PCF8575_GPIO) += pcf8575_gpio.o
diff --git a/drivers/gpio/octeontx_gpio.c b/drivers/gpio/octeontx_gpio.c
new file mode 100644
index 0000000000..d012044c47
--- /dev/null
+++ b/drivers/gpio/octeontx_gpio.c
@@ -0,0 +1,218 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ * https://spdx.org/licenses
+ *
+ * (C) Copyright 2011
+ * eInfochips Ltd. <www.einfochips.com>
+ * Written-by: Ajay Bhargav <ajay.bhar...@einfochips.com>
+ *
+ * (C) Copyright 2010
+ * Marvell Semiconductor <www.marvell.com>
+ *
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <malloc.h>
+#include <errno.h>
+#include <fdtdec.h>
+#include <asm/io.h>
+#include <asm/gpio.h>
+#include <asm/bitops.h>
+#include <dt-bindings/gpio/gpio.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/** Returns the bit value to write or read based on the offset */
+#define GPIO_BIT(x) (1ULL << ((x) & 0x3f))
+
+#define GPIO_RX_DAT (0x0)
+#define GPIO_TX_SET (0x8)
+#define GPIO_TX_CLR (0x10)
+#define GPIO_CONST (0x90)
+#define GPIO_RX1_DAT (0x1400)
+#define GPIO_TX1_SET (0x1408)
+#define GPIO_TX1_CLR (0x1410)
+
+/** Returns the offset to the output register based on the offset and value */
+#define GPIO_TX_REG(offset, value) \
+ ((offset) >= 64 ? ((value) ? GPIO_TX1_SET : GPIO_TX1_CLR) : \
+ ((value) ? GPIO_TX_SET : GPIO_TX_CLR))
+
+/** Returns the offset to the input data register based on the offset */
+#define GPIO_RX_DAT_REG(offset) (((offset) >= 64) ? GPIO_RX1_DAT : GPIO_RX_DAT)
+
+/** Returns the bit configuration register based on the offset */
+#define GPIO_BIT_CFG(x) (0x400 + 8 * (x))
+#define GPIO_BIT_CFG_FN(x) (((x) >> 16) & 0x3ff)
+#define GPIO_BIT_CFG_TX_OE(x) ((x) & 0x1)
+#define GPIO_BIT_CFG_RX_DAT(x) ((x) & 0x1)
+
+/** PCI ID on NCB bus */
+#define PCI_DEVICE_ID_OCTEONTX_GPIO 0xa00a
+
+union gpio_const {
+ u64 u;
+ struct {
+ u64 gpios:8; /** Number of GPIOs implemented */
+ u64 pp:8; /** Number of PP vectors */
+ u64:48; /* Reserved */
+ } s;
+};
+
+struct octeontx_gpio {
+ void __iomem *baseaddr;
+};
+
+static int octeontx_gpio_dir_input(struct udevice *dev, unsigned int offset)
+{
+ struct octeontx_gpio *gpio = dev_get_priv(dev);
+
+ debug("%s(%s, %u)\n", __func__, dev->name, offset);
+ clrbits_le64(gpio->baseaddr + GPIO_BIT_CFG(offset),
+ (0x3ffUL << 16) | 4UL | 2UL | 1UL);
+ return 0;
+}
+
+static int octeontx_gpio_dir_output(struct udevice *dev, unsigned int offset,
+ int value)
+{
+ struct octeontx_gpio *gpio = dev_get_priv(dev);
+
+ debug("%s(%s, %u, %d)\n", __func__, dev->name, offset, value);
+ writeq(GPIO_BIT(offset), gpio->baseaddr + GPIO_TX_REG(offset, value));
+
+ clrsetbits_le64(gpio->baseaddr + GPIO_BIT_CFG(offset),
+ ((0x3ffUL << 16) | 4UL), 1UL);
+ return 0;
+}
+
+static int octeontx_gpio_get_value(struct udevice *dev,
+ unsigned int offset)
+{
+ struct octeontx_gpio *gpio = dev_get_priv(dev);
+ u64 reg = readq(gpio->baseaddr + GPIO_RX_DAT_REG(offset));
+
+ debug("%s(%s, %u): value: %d\n", __func__, dev->name, offset,
+ !!(reg & GPIO_BIT(offset)));
+
+ return !!(reg & GPIO_BIT(offset));
+}
+
+static int octeontx_gpio_set_value(struct udevice *dev,
+ unsigned int offset, int value)
+{
+ struct octeontx_gpio *gpio = dev_get_priv(dev);
+
+ debug("%s(%s, %u, %d)\n", __func__, dev->name, offset, value);
+ writeq(GPIO_BIT(offset), gpio->baseaddr + GPIO_TX_REG(offset, value));
+
+ return 0;
+}
+
+static int octeontx_gpio_get_function(struct udevice *dev,
+ unsigned int offset)
+{
+ struct octeontx_gpio *gpio = dev_get_priv(dev);
+ u64 pinsel = readl(gpio->baseaddr + GPIO_BIT_CFG(offset));
+
+ debug("%s(%s, %u): pinsel: 0x%llx\n", __func__, dev->name, offset,
+ pinsel);
+ if (GPIO_BIT_CFG_FN(pinsel))
+ return GPIOF_FUNC;
+ else if (GPIO_BIT_CFG_TX_OE(pinsel))
+ return GPIOF_OUTPUT;
+ else
+ return GPIOF_INPUT;
+}
+
+static int octeontx_gpio_xlate(struct udevice *dev, struct gpio_desc *desc,
+ struct ofnode_phandle_args *args)
+{
+ if (args->args_count < 1)
+ return -EINVAL;
+
+ desc->offset = args->args[0];
+ desc->flags = 0;
+ if (args->args_count > 1) {
+ if (args->args[1] & GPIO_ACTIVE_LOW)
+ desc->flags |= GPIOD_ACTIVE_LOW;
+ /* In the future add tri-state flag support */
+ }
+ return 0;
+}
+
+static const struct dm_gpio_ops octeontx_gpio_ops = {
+ .direction_input = octeontx_gpio_dir_input,
+ .direction_output = octeontx_gpio_dir_output,
+ .get_value = octeontx_gpio_get_value,
+ .set_value = octeontx_gpio_set_value,
+ .get_function = octeontx_gpio_get_function,
+ .xlate = octeontx_gpio_xlate,
+};
+
+static int octeontx_gpio_probe(struct udevice *dev)
+{
+ pci_dev_t bdf = dm_pci_get_bdf(dev);
+ struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
+ struct octeontx_gpio *priv = dev_get_priv(dev);
+ union gpio_const gpio_const;
+ char *end;
+ const char *status;
+
+ status = ofnode_read_string(dev->node, "status");
+
+ if (status && !strncmp(status, "ok", 2)) {
+ debug("%s(%s): GPIO device disabled in device tree\n",
+ __func__, dev->name);
+ return -1;
+ }
+
+ dev->req_seq = PCI_FUNC(bdf);
+ priv->baseaddr = dm_pci_map_bar(dev, PCI_BASE_ADDRESS_0,
+ PCI_REGION_MEM);
+
+ if (!priv->baseaddr) {
+ debug("%s(%s): Could not get base address\n",
+ __func__, dev->name);
+ return -1;
+ }
+
+ gpio_const.u = readq(priv->baseaddr + GPIO_CONST);
+
+ debug("%s(%s): base address: %p, of_offset: %ld, pin count: %d\n",
+ __func__, dev->name, priv->baseaddr, dev->node.of_offset,
+ gpio_const.s.gpios);
+
+ uc_priv->gpio_count = gpio_const.s.gpios;
+ uc_priv->bank_name = strdup(dev->name);
+ end = strchr(uc_priv->bank_name, '@');
+ end[0] = 'A' + dev->seq;
+ end[1] = '\0';
+
+ return 0;
+}
+
+static const struct udevice_id octeontx_gpio_ids[] = {
+ { .compatible = "cavium,thunder-8890-gpio" },
+ { }
+};
+
+U_BOOT_DRIVER(octeontx_gpio) = {
+ .name = "octeontx_gpio",
+ .id = UCLASS_GPIO,
+ .of_match = of_match_ptr(octeontx_gpio_ids),
+ .probe = octeontx_gpio_probe,
+ .priv_auto_alloc_size = sizeof(struct octeontx_gpio),
+ .ops = &octeontx_gpio_ops,
+ .flags = DM_FLAG_PRE_RELOC,
+};
+
+static struct pci_device_id octeontx_gpio_supported[] = {
+ { PCI_VDEVICE(CAVIUM, PCI_DEVICE_ID_OCTEONTX_GPIO) },
+ { },
+};
+
+U_BOOT_PCI_DEVICE(octeontx_gpio, octeontx_gpio_supported);
--
2.23.0
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
