Hi,
On Tue, 22 Oct 2019 at 23:23, AKASHI Takahiro
<takahiro.aka...@linaro.org> wrote:
>
> On Mon, Oct 21, 2019 at 06:17:03PM -0600, Simon Glass wrote:
> > Hi Takahiro,
> >
> > On Tue, 8 Oct 2019 at 23:27, AKASHI Takahiro <takahiro.aka...@linaro.org>
> > wrote:
> > >
> > > In the current implementation of FIT_SIGNATURE, five parameters for
> > > a RSA public key are required while only two of them are essential.
> > > (See rsa-mod-exp.h and uImage.FIT/signature.txt)
> > > This is a result of considering relatively limited computer power
> > > and resources on embedded systems, while such a assumption may not
> > > be quite practical for other use cases.
> > >
> > > In this patch, added is a function, rsa_gen_key_prop(), which will
> > > generate additional parameters for other uses, in particular
> > > UEFI secure boot, on the fly.
> > >
> > > Note: the current code uses some "big number" routines from BearSSL
> > > for the calculation.
> > >
> > > Signed-off-by: AKASHI Takahiro <takahiro.aka...@linaro.org>
> > > ---
> > > include/u-boot/rsa-mod-exp.h | 3 +
> > > lib/rsa/Kconfig | 7 +
> > > lib/rsa/Makefile | 1 +
> > > lib/rsa/rsa-keyprop.c | 585 +++++++++++++++++++++++++++++++++++
> > > 4 files changed, 596 insertions(+)
> > > create mode 100644 lib/rsa/rsa-keyprop.c
> > >
> > > diff --git a/include/u-boot/rsa-mod-exp.h b/include/u-boot/rsa-mod-exp.h
> > > index 8a428c4b6a1a..ca189292d869 100644
> > > --- a/include/u-boot/rsa-mod-exp.h
> > > +++ b/include/u-boot/rsa-mod-exp.h
> > > @@ -26,6 +26,9 @@ struct key_prop {
> > > uint32_t exp_len; /* Exponent length in number of uint8_t */
> > > };
> > >
> > > +struct key_prop *rsa_gen_key_prop(const void *key, uint32_t keylen);
> > > +void rsa_free_key_prop(struct key_prop *prop);
> >
> > Please add full function comments.
>
> Sure.
>
> > > +
> > > /**
> > > * rsa_mod_exp_sw() - Perform RSA Modular Exponentiation in sw
> > > *
> > > diff --git a/lib/rsa/Kconfig b/lib/rsa/Kconfig
> > > index 62b7ab9c5e5c..d1743d7a4c47 100644
> > > --- a/lib/rsa/Kconfig
> > > +++ b/lib/rsa/Kconfig
> > > @@ -30,6 +30,13 @@ config RSA_VERIFY
> > > help
> > > Add RSA signature verification support.
> > >
> > > +config RSA_VERIFY_WITH_PKEY
> > > + bool "Execute RSA verification without key parameters from FDT"
> > > + depends on RSA
> > > + help
> > > + This options enables RSA signature verification without
> > > + using public key parameters which is embedded control FDT.
> >
> > How about something like...
> >
> > The standard RSA-signature verification code uses ....
> >
> > This does not suit the use case where ...
> >
> > This option enables ...
>
> I will try to improve ...
>
> > > +
> > > config RSA_SOFTWARE_EXP
> > > bool "Enable driver for RSA Modular Exponentiation in software"
> > > depends on DM
> > > diff --git a/lib/rsa/Makefile b/lib/rsa/Makefile
> > > index c07305188e0c..14ed3cb4012b 100644
> > > --- a/lib/rsa/Makefile
> > > +++ b/lib/rsa/Makefile
> > > @@ -6,4 +6,5 @@
> > > # Wolfgang Denk, DENX Software Engineering, w...@denx.de.
> > >
> > > obj-$(CONFIG_$(SPL_)RSA_VERIFY) += rsa-verify.o rsa-checksum.o
> > > +obj-$(CONFIG_RSA_VERIFY_WITH_PKEY) += rsa-keyprop.o
> > > obj-$(CONFIG_RSA_SOFTWARE_EXP) += rsa-mod-exp.o
> > > diff --git a/lib/rsa/rsa-keyprop.c b/lib/rsa/rsa-keyprop.c
> > > new file mode 100644
> > > index 000000000000..d7d222e9bed9
> > > --- /dev/null
> > > +++ b/lib/rsa/rsa-keyprop.c
> > > @@ -0,0 +1,585 @@
> > > +// SPDX-License-Identifier: GPL-2.0+ and MIT
> > > +/*
> > > + * RSA library - generate parameters for a public key
> > > + *
> > > + * Copyright (c) 2019 Linaro Limited
> > > + * Author: AKASHI Takahiro
> > > + *
> > > + * Big number routines in this file come from BearSSL:
> > > + * Copyright (c) 2016 Thomas Pornin <por...@bolet.org>
> > > + */
> > > +
> > > +#include <common.h>
> > > +#include <image.h>
> > > +#include <malloc.h>
> > > +#include <asm/byteorder.h>
> > > +#include <crypto/internal/rsa.h>
> > > +#include <u-boot/rsa-mod-exp.h>
> > > +
> > > +static inline unsigned
> >
> > Please drop the inlines unless needed. Would prefer to leave this to
> > the compiler.
>
> Okay.
>
> > Also please keep the function name on the same line as the 'static'.
>
> Okay.
>
> > > +br_dec16be(const void *src)
> > > +{
> > > + return be16_to_cpup(src);
> > > +}
> > > +
> > > +static inline uint32_t
> > > +br_dec32be(const void *src)
> > > +{
> > > + return be32_to_cpup(src);
> > > +}
> > > +
> > > +static inline void
> > > +br_enc32be(void *dst, uint32_t x)
> > > +{
> > > + __be32 tmp;
> > > +
> > > + tmp = cpu_to_be32(x);
> > > + memcpy(dst, &tmp, sizeof(tmp));
> > > +}
> > > +
> > > +/* stripped version of src/inner.h */
> >
> > ??
>
> I mean that only a small subset of BearSSL's src/inner.h was imported here.
>
> > > +
> > > +static inline uint32_t
> > > +NOT(uint32_t ctl)
> > > +{
> > > + return ctl ^ 1;
> > > +}
> > > +
> >
> > All of these functions need full comments please.
>
> All the functions imported from BearSSL?
> Please note that all the functions, except rsa_gen_key_prop()
> rsa_free_key_prop(), are just imported without changes and
> all are declared as static.
>
> > > +static inline uint32_t
> > > +MUX(uint32_t ctl, uint32_t x, uint32_t y)
> > > +{
> > > + return y ^ (-ctl & (x ^ y));
> > > +}
> > > +
> > > +static inline uint32_t
> > > +EQ(uint32_t x, uint32_t y)
> >
> > Should use lower case. Please run patman.
>
> I would like to honer the original code(BearSSL)'s notation including
> upper/lower cases for minimizing differences.
There is precedent for this. It's just that I'm not sure the code is
complicated enough to worry about keeping the comment-free
single-char-variable style?
+Tom Rini I assume you are OK with this?
Regards,
Simon
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
