Add VTM node for voltage and thermal management. For u-boot, this is needed
for supporting AVS class 0, as the efuse values for the OPPs are stored
under the VTM.
Signed-off-by: Keerthy <j-keer...@ti.com>
---
Changes in v3:
* No change
Changes in v2:
* No change
arch/arm/dts/k3-j721e-r5-common-proc-board.dts | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm/dts/k3-j721e-r5-common-proc-board.dts
b/arch/arm/dts/k3-j721e-r5-common-proc-board.dts
index 54d7998d27..e569809fcb 100644
--- a/arch/arm/dts/k3-j721e-r5-common-proc-board.dts
+++ b/arch/arm/dts/k3-j721e-r5-common-proc-board.dts
@@ -59,6 +59,13 @@
mboxes= <&mcu_secproxy 4>, <&mcu_secproxy 5>;
mbox-names = "tx", "rx";
};
+
+ wkup_vtm0: wkup_vtm@42040000 {
+ compatible = "ti,am654-vtm", "ti,j721e-avs";
+ reg = <0x0 0x42040000 0x0 0x330>;
+ power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>;
+ #thermal-sensor-cells = <1>;
+ };
};
&dmsc {
--
2.17.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
