From: Steffen Dirkwinkel <s.dirkwin...@beckhoff.com>
Note: gpio7_8 was never used for usb power regulator so we remove it here
Acked-by: Patrick Bruenn <p.bru...@beckhoff.com>
Signed-off-by: Steffen Dirkwinkel <s.dirkwin...@beckhoff.com>
---
arch/arm/dts/imx53-cx9020.dts | 11 ++++++++++-
board/beckhoff/mx53cx9020/mx53cx9020.c | 10 ----------
configs/mx53cx9020_defconfig | 6 ++++++
3 files changed, 16 insertions(+), 11 deletions(-)
diff --git a/arch/arm/dts/imx53-cx9020.dts b/arch/arm/dts/imx53-cx9020.dts
index 2b7f7288088..e08850999b1 100644
--- a/arch/arm/dts/imx53-cx9020.dts
+++ b/arch/arm/dts/imx53-cx9020.dts
@@ -36,7 +36,6 @@
MX53_PAD_GPIO_1__GPIO1_1 0x80000000
MX53_PAD_GPIO_4__GPIO1_4 0x80000000
MX53_PAD_PATA_DA_0__GPIO7_6 0x80000000
- MX53_PAD_PATA_DA_2__GPIO7_8 0x80000000
MX53_PAD_GPIO_16__GPIO7_11 0x80000000
MX53_PAD_EIM_OE__EMI_WEIM_OE
0x80000000
@@ -220,3 +219,13 @@
full-duplex;
};
};
+
+&usbh1 {
+ phy_type = "utmi";
+ status = "okay";
+};
+
+&usbotg {
+ dr_mode = "host";
+ status = "okay";
+};
diff --git a/board/beckhoff/mx53cx9020/mx53cx9020.c
b/board/beckhoff/mx53cx9020/mx53cx9020.c
index 9450d925f6f..caffd5c9ee8 100644
--- a/board/beckhoff/mx53cx9020/mx53cx9020.c
+++ b/board/beckhoff/mx53cx9020/mx53cx9020.c
@@ -127,16 +127,6 @@ static void setup_gpio_leds(void)
gpio_direction_output(GPIO_LED_PWR_G, 0);
}
-#ifdef CONFIG_USB_EHCI_MX5
-int board_ehci_hcd_init(int port)
-{
- /* request VBUS power enable pin, GPIO7_8 */
- gpio_direction_output(IMX_GPIO_NR(7, 8), 1);
- return 0;
-}
-#endif
-
-
static int power_init(void)
{
/* nothing to do on CX9020 */
diff --git a/configs/mx53cx9020_defconfig b/configs/mx53cx9020_defconfig
index 17c44bd070a..6087ed81ec9 100644
--- a/configs/mx53cx9020_defconfig
+++ b/configs/mx53cx9020_defconfig
@@ -19,7 +19,13 @@ CONFIG_CMD_PXE=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_EXT4=y
CONFIG_CMD_FAT=y
+CONFIG_CMD_USB=y
CONFIG_CMD_FS_GENERIC=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USB_EHCI_MX5=y
+CONFIG_USB_STORAGE=y
+CONFIG_DM_REGULATOR=y
CONFIG_OF_CONTROL=y
CONFIG_DEFAULT_DEVICE_TREE="imx53-cx9020"
CONFIG_ENV_IS_IN_MMC=y
--
2.23.0
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
