>-----Original Message----- >From: Wasim Khan >Sent: Friday, October 18, 2019 7:38 PM >To: Priyanka Jain <[email protected]> >Cc: [email protected]; Wasim Khan <[email protected]> >Subject: [PATCH 1/8] driver/pci : enable pcie layerscape code for pcie gen4 >code > >lx2 rev2 has SNP controller. Enable pcie_layerscape code for >CONFIG_PCIE_LAYERSCAPE_GEN4. Based on SoC and revision pcie controller >probe will be invoked. > >Signed-off-by: Wasim Khan <[email protected]> >--- > drivers/pci/Makefile | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > >diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile index b1d3dc8..d6a9b8c >100644 >--- a/drivers/pci/Makefile >+++ b/drivers/pci/Makefile >@@ -35,7 +35,7 @@ obj-$(CONFIG_PCIE_FSL) += pcie_fsl.o pcie_fsl_fixup.o > obj-$(CONFIG_PCIE_LAYERSCAPE) += pcie_layerscape.o > obj-$(CONFIG_PCIE_LAYERSCAPE) += pcie_layerscape_fixup.o > obj-$(CONFIG_PCIE_LAYERSCAPE_GEN4) += pcie_layerscape_gen4.o \ >- pcie_layerscape_gen4_fixup.o >+ pcie_layerscape_gen4_fixup.o >pcie_layerscape.o Please check that there is no device which has both CONFIG_PCIE_LAYERSCAPE_GEN4 and CONFIG_PCIE_LAYERSCAPE defined. Can we think of better config name/re-organization considering all devices.
--priyankajain > obj-$(CONFIG_PCI_XILINX) += pcie_xilinx.o > obj-$(CONFIG_PCIE_INTEL_FPGA) += pcie_intel_fpga.o > obj-$(CONFIG_PCI_KEYSTONE) += pcie_dw_ti.o >-- >2.7.4 _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
