On 28/08/2019 10:22, Neil Armstrong wrote: > On 18/08/2019 15:42, Beniamino Galvani wrote: >> Hi, >> >> these two patches enable the USB host controller on Odroid-C2. The >> first patch adds a PHY driver; the second one enables the necessary >> configuration options and updates the device tree. >> >> Note that the DWC2 driver currently does not support enabling PHYs >> from the device tree and so the following series (still on review) is >> needed as runtime requirement for the second patch: >> >> [PATCH 0/5] usb: host: dwc2: use driver model for PHY and CLOCK > > > Pushed to my u-boot-amlogic-next test tree until this dependency is applied.
The resend version had some comments, could you resent when Patrick sends an updated version ? Neil > > Thanks, > Neil > >> >> Thanks, >> Beniamino >> >> Beniamino Galvani (2): >> phy: meson: add GXBB PHY driver >> odroid-c2: enable USB host controller >> >> arch/arm/dts/meson-gxbb-odroidc2-u-boot.dtsi | 8 + >> configs/odroid-c2_defconfig | 7 + >> drivers/phy/Kconfig | 8 + >> drivers/phy/Makefile | 1 + >> drivers/phy/meson-gxbb-usb2.c | 235 +++++++++++++++++++ >> include/configs/meson64.h | 5 + >> 6 files changed, 264 insertions(+) >> create mode 100644 drivers/phy/meson-gxbb-usb2.c >> > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
