Hi Marek, On Tue, Oct 15, 2019 at 1:27 PM Marek Vasut <ma...@denx.de> wrote: > > According to IMX28CEC rev. 4, 10/2018, Table 15. Recommended Operating > Conditions, page 16, the VDDD should be set to 1.55V when the CPU is > operating at 454MHz. This is the case in U-Boot, hence increase the > VDDD voltage. This fixes instability when performing TFTP transfers. > Increase the brownout threshold to 1.4V. The documentation recommends > 1.45V setting for the brownout, however, this triggers failure during > power block init, so keep the brownout slightly lower. > > Signed-off-by: Marek Vasut <ma...@denx.de> > Cc: Stefano Babic <sba...@denx.de>
Looks good, thanks: Reviewed-by: Fabio Estevam <feste...@gmail.com> _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
