On Wed, Oct 9, 2019 at 2:56 PM Dalon L Westergreen
<dalon.westergr...@linux.intel.com> wrote:
>
> On Sat, 2019-10-05 at 21:41 +0200, Simon Goldschmidt wrote:
>
> Am 27.09.2019 um 20:27 schrieb Dalon Westergreen:
>
> From: Dalon Westergreen <
>
> dalon.westergr...@intel.com
>
> >
>
>
> CONFIG_OF_EMBED was primarily enabled to support the stratix10
>
> spl hex file requirements.  Since this option now produces a
>
> warning during build, and the spl hex can be created using
>
> alternate methods, CONFIG_OF_EMBED is no longer needed.
>
>
> Signed-off-by: Dalon Westergreen <
>
> dalon.westergr...@intel.com
>
> >
>
> ---
>
>   configs/socfpga_stratix10_defconfig       | 1 -
>
>   include/configs/socfpga_stratix10_socdk.h | 2 +-
>
>   2 files changed, 1 insertion(+), 2 deletions(-)
>
>
> diff --git a/configs/socfpga_stratix10_defconfig 
> b/configs/socfpga_stratix10_defconfig
>
> index 5ae53a4db9..ae1b9bead1 100644
>
> --- a/configs/socfpga_stratix10_defconfig
>
> +++ b/configs/socfpga_stratix10_defconfig
>
> @@ -27,7 +27,6 @@ CONFIG_CMD_CACHE=y
>
>   CONFIG_CMD_EXT4=y
>
>   CONFIG_CMD_FAT=y
>
>   CONFIG_CMD_FS_GENERIC=y
>
> -CONFIG_OF_EMBED=y
>
>   CONFIG_DEFAULT_DEVICE_TREE="socfpga_stratix10_socdk"
>
>   CONFIG_ENV_IS_IN_MMC=y
>
>   CONFIG_NET_RANDOM_ETHADDR=y
>
> diff --git a/include/configs/socfpga_stratix10_socdk.h 
> b/include/configs/socfpga_stratix10_socdk.h
>
> index 7b55dd14da..f9ecf9d2df 100644
>
> --- a/include/configs/socfpga_stratix10_socdk.h
>
> +++ b/include/configs/socfpga_stratix10_socdk.h
>
> @@ -204,6 +204,6 @@ unsigned int cm_get_l4_sys_free_clk_hz(void);
>
>
>
>   /* SPL SDMMC boot support */
>
>   #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
>
> -#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
>
> +#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot-dtb.img"
>
>
> Didn't we have this before? The payload name "u-boot.img" is correct for
>
> all configurations. Without CONFIG_OF_EMBED the two above are the same,
>
> but changing the name should not be necessary.
>
>
> Regards,
>
> Simon
>
>
> Correct, but it seems convention is to just use u-boot.img and i would like 
> all the socfpga devices
> to do the same thing.

Right. 'u-boot.img' is the one to use. Why do you change it to 'u-boot-dtb.img'
then in this patch?

Regards,
Simon

>
> --dalon
>
>
>
>
>   #endif /* __CONFIG_H */
>
>
>
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot

Reply via email to