Hi Pierre-Jen,
On 07/10/19 20:44, Pierre-Jean Texier wrote:
> Stefano, Peng,
>
> I just compiled a fresh U-Boot with u-boot-imx/next and It looks
> like commit 34f2feb ("imx: mmc_env: update runtime SD/MMC boot env
> device") [1]
> breaks my WaRP7 (but the same for the Pico-Pi i.MX7, tested by Joris in
> CC),
> see logs after:
>
> U-Boot 2019.10-rc4-00232-gd03193d (Oct 07 2019 - 18:44:25 +0200)
>
> CPU: Freescale i.MX7S rev1.2 800 MHz (running at 792 MHz)
> CPU: Extended Commercial temperature grade (-20C to 105C) at 33C
> Reset cause: POR
> Model: Warp i.MX7 Board
> Board: WARP7 in secure mode OPTEE DRAM 0x9d000000-0xa0000000
> DRAM: 464 MiB
> MMC: FSL_SDHC: 1, FSL_SDHC: 0
> Loading Environment from MMC... MMC Device 2 not found
> *** Warning - No MMC card found, using default environment
> ...
> => env default -f -a
> ## Resetting to default environment
> => env save
> Saving Environment to MMC... MMC Device 2 not found
> No MMC card found
> Failed (1)
>
> FYI, with a git revert -s 34f2feb92db6146831bafa696b7b46785c9f6b10,
> all is working fine:
>
Thanks for testing - at the moment, I will drop it from -next.
> => env default -f -a
> ## Resetting to default environment
> => env save
> Saving Environment to MMC... Writing to MMC(0)... OK
>
> So, can you consider this commit 'not applicable' for 2019.10 ?
>
None of what you see in -next is for 2019.10. My last PR had already too
many patches and it cannot flow into 2019.10. Currently, -next has ~130
new commit, it cannot flow into the release - I will send PR afterwards.
Best regards,
Stefano
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sba...@denx.de
=====================================================================
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
