From: Matthias Brugger <mbrug...@suse.com>
For bcm283x based on arm64 we also have to change the mm_region.
Add assign this in mach_cpu_init() so we can create now one binary
for RPi3 and RPi4.
Signed-off-by: Matthias Brugger <mbrug...@suse.com>
---
arch/arm/mach-bcm283x/init.c | 65 +++++++++++++++++++++++++--
board/raspberrypi/rpi/lowlevel_init.S | 6 +++
board/raspberrypi/rpi/rpi.c | 45 -------------------
3 files changed, 67 insertions(+), 49 deletions(-)
diff --git a/arch/arm/mach-bcm283x/init.c b/arch/arm/mach-bcm283x/init.c
index 214e1078eb..f6c2946922 100644
--- a/arch/arm/mach-bcm283x/init.c
+++ b/arch/arm/mach-bcm283x/init.c
@@ -8,16 +8,68 @@
#include <common.h>
#include <dm/device.h>
+#ifdef CONFIG_ARM64
+#include <asm/armv8/mmu.h>
+#endif
#define PDATA_BCM2835 0
#define PDATA_BCM2836 1
#define PDATA_BCM2837 2
-#define PDATA_BCM2838 3
+#define PDATA_BCM2711 3
extern unsigned long rpi_bcm283x_base;
+#ifdef CONFIG_ARM64
+extern struct mm_region *mem_map;
+
+static struct mm_region bcm283x_mem_map[] = {
+ {
+ .virt = 0x00000000UL,
+ .phys = 0x00000000UL,
+ .size = 0x3f000000UL,
+ .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+ PTE_BLOCK_INNER_SHARE
+ }, {
+ .virt = 0x3f000000UL,
+ .phys = 0x3f000000UL,
+ .size = 0x01000000UL,
+ .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+ PTE_BLOCK_NON_SHARE |
+ PTE_BLOCK_PXN | PTE_BLOCK_UXN
+ }, {
+ /* List terminator */
+ 0,
+ }
+};
+
+static struct mm_region bcm2711_mem_map[] = {
+ {
+ .virt = 0x00000000UL,
+ .phys = 0x00000000UL,
+ .size = 0xfe000000UL,
+ .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
+ PTE_BLOCK_INNER_SHARE
+ }, {
+ .virt = 0xfe000000UL,
+ .phys = 0xfe000000UL,
+ .size = 0x01800000UL,
+ .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
+ PTE_BLOCK_NON_SHARE |
+ PTE_BLOCK_PXN | PTE_BLOCK_UXN
+ }, {
+ /* List terminator */
+ 0,
+ }
+};
+#else
+struct mm_region {
+ /* dummy struct */
+};
+#endif
+
struct bcm283x_pdata {
unsigned long io_base;
+ struct mm_region *m_map;
};
struct bcm283x_pdata pdata_bcm283x[] = {
@@ -30,9 +82,11 @@ struct bcm283x_pdata pdata_bcm283x[] = {
#ifdef CONFIG_ARM64
[PDATA_BCM2837] = {
.io_base = 0x3f000000,
+ .m_map = bcm283x_mem_map,
},
- [PDATA_BCM2838] = {
+ [PDATA_BCM2711] = {
.io_base = 0xfe000000,
+ .m_map = bcm2711_mem_map
},
#endif
};
@@ -45,8 +99,8 @@ static const struct udevice_id board_ids[] = {
{ .compatible = "brcm,bcm2835", .data = PDATA_BCM2835},
{ .compatible = "brcm,bcm2836", .data = PDATA_BCM2836},
{ .compatible = "brcm,bcm2837", .data = PDATA_BCM2837},
- { .compatible = "brcm,bcm2838", .data = PDATA_BCM2838},
- { .compatible = "brcm,bcm2711", .data = PDATA_BCM2838},
+ { .compatible = "brcm,bcm2838", .data = PDATA_BCM2711},
+ { .compatible = "brcm,bcm2711", .data = PDATA_BCM2711},
{ },
};
@@ -72,6 +126,9 @@ int mach_cpu_init(void)
if (!ret) {
pdat = pdata_bcm283x[of_match->data];
rpi_bcm283x_base = pdat.io_base;
+#ifdef CONFIG_ARM64
+ mem_map = pdat.m_map;
+#endif
break;
}
diff --git a/board/raspberrypi/rpi/lowlevel_init.S
b/board/raspberrypi/rpi/lowlevel_init.S
index fcb99ebef7..9786a5a4b3 100644
--- a/board/raspberrypi/rpi/lowlevel_init.S
+++ b/board/raspberrypi/rpi/lowlevel_init.S
@@ -23,6 +23,12 @@ fw_dtb_pointer:
.word 0x0
#endif
+#ifdef CONFIG_ARM64
+.global mem_map
+mem_map:
+ .dword 0x0
+#endif
+
/*
* Routine: save_boot_params (called after reset from start.S)
* Description: save ATAG/FDT address provided by the firmware at boot time
diff --git a/board/raspberrypi/rpi/rpi.c b/board/raspberrypi/rpi/rpi.c
index 9e0abdda31..cf1666ce5f 100644
--- a/board/raspberrypi/rpi/rpi.c
+++ b/board/raspberrypi/rpi/rpi.c
@@ -248,51 +248,6 @@ static uint32_t rev_scheme;
static uint32_t rev_type;
static const struct rpi_model *model;
-#ifdef CONFIG_ARM64
-#ifndef CONFIG_BCM2711
-static struct mm_region bcm283x_mem_map[] = {
- {
- .virt = 0x00000000UL,
- .phys = 0x00000000UL,
- .size = 0x3f000000UL,
- .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
- PTE_BLOCK_INNER_SHARE
- }, {
- .virt = 0x3f000000UL,
- .phys = 0x3f000000UL,
- .size = 0x01000000UL,
- .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
- PTE_BLOCK_NON_SHARE |
- PTE_BLOCK_PXN | PTE_BLOCK_UXN
- }, {
- /* List terminator */
- 0,
- }
-};
-#else
-static struct mm_region bcm283x_mem_map[] = {
- {
- .virt = 0x00000000UL,
- .phys = 0x00000000UL,
- .size = 0xfe000000UL,
- .attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
- PTE_BLOCK_INNER_SHARE
- }, {
- .virt = 0xfe000000UL,
- .phys = 0xfe000000UL,
- .size = 0x01800000UL,
- .attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
- PTE_BLOCK_NON_SHARE |
- PTE_BLOCK_PXN | PTE_BLOCK_UXN
- }, {
- /* List terminator */
- 0,
- }
-};
-#endif
-struct mm_region *mem_map = bcm283x_mem_map;
-#endif
-
int dram_init(void)
{
ALLOC_CACHE_ALIGN_BUFFER(struct msg_get_arm_mem, msg, 1);
--
2.22.0
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
