U-Boot uses CONFIG_SPI_FLASH_USE_4K_SECTORS to enable 4K small sector
support. Use that instead of MTD_SPI_NOR_USE_4K_SECTORS.
Reported-by: Eugeniy Paltsev <eugeniy.palt...@synopsys.com>
Signed-off-by: Vignesh Raghavendra <vigne...@ti.com>
---
drivers/mtd/spi/spi-nor-core.c | 2 +-
drivers/mtd/spi/spi-nor-ids.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/mtd/spi/spi-nor-core.c b/drivers/mtd/spi/spi-nor-core.c
index 22915c23edff..8412e5e8515f 100644
--- a/drivers/mtd/spi/spi-nor-core.c
+++ b/drivers/mtd/spi/spi-nor-core.c
@@ -1745,7 +1745,7 @@ static int spi_nor_parse_bfpt(struct spi_nor *nor,
erasesize = 1U << erasesize;
opcode = (half >> 8) & 0xff;
-#ifdef CONFIG_MTD_SPI_NOR_USE_4K_SECTORS
+#ifdef CONFIG_SPI_FLASH_USE_4K_SECTORS
if (erasesize == SZ_4K) {
nor->erase_opcode = opcode;
mtd->erasesize = erasesize;
diff --git a/drivers/mtd/spi/spi-nor-ids.c b/drivers/mtd/spi/spi-nor-ids.c
index ba154709f880..2e0aebbc44aa 100644
--- a/drivers/mtd/spi/spi-nor-ids.c
+++ b/drivers/mtd/spi/spi-nor-ids.c
@@ -58,7 +58,7 @@
* All newly added entries should describe *hardware* and should use SECT_4K
* (or SECT_4K_PMC) if hardware supports erasing 4 KiB sectors. For usage
* scenarios excluding small sectors there is config option that can be
- * disabled: CONFIG_MTD_SPI_NOR_USE_4K_SECTORS.
+ * disabled: CONFIG_SPI_FLASH_USE_4K_SECTORS.
* For historical (and compatibility) reasons (before we got above config) some
* old entries may be missing 4K flag.
*/
--
2.23.0
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
