Hi Anand,
On 2019/9/16 下午7:03, Anand Moon wrote:
Hi Jagan / Kever,
I have with me Odroid - N1 per-released development board,
It's almost same form factor to "Firefly-RK3399 Board" with
rk3399-sdram-ddr3-1600.dtsi ram configuration.
I have configure Odroid - N1 board to boot using TPL / SPL configuration
using latest kernel and latest u-boot, but I am facing some issue with not
able to upgrade my distro packages, It's literally hangs on heavy I/O
operations.
So I would like to check if the memory is working correctly, but below
command failed.
# sudo memtester 1024 5
memtester version 4.3.0 (64-bit)
Copyright (C) 2001-2012 Charles Cazabon.
Licensed under the GNU General Public License version 2 (only).
pagesize is 4096
pagesizemask is 0xfffffffffffff000
want 1024MB (1073741824 bytes)
got 1024MB (1073741824 bytes), trying mlock ...
Then I would like to enable *memtest=4* via bootargs ie kernel command
line and it failed to boot up.
I'm not able to understand well about your issue, does it:
- boots fine with odroid-N1 but hang at memtester ?
- hang at "Starting kernel..." with kernel command like update
Since it boots OK, the DRAM should works OK, you can replace the TPL
with rockchip binary ddr[0]
to double check if they have the same output.
I have no idea about the bootargs "memtest=4", but I suppose this should
not affect the kernel
boot process, maybe you have do something wrong and not update the
bootargs as what you
expect, you can print it in U-Boot to check the actually bootargs.
Thanks,
- Kever
[0]
https://github.com/rockchip-linux/rkbin/blob/master/bin/rk33/rk3399_ddr_800MHz_v1.23.bin
below is the logs.
-------------------
U-Boot TPL 2019.10-rc3-00320-g23b93e33ad-dirty (Sep 16 2019 - 18:17:38)
con reg
cru , cic , grf , sgrf , pmucru , pmu
Starting SDRAM initialization...
sdram_init: data trained for rank 2, ch 0
sdram_init: data trained for rank 2, ch 1
Channel 0: sdram_init: data train failed for channel 0
Channel 1: sdram_init: data train failed for channel 0
256B stride
cic: ctr10 : (0xff620000 - 0x14)
cic: status0 : (0xff620010 - 0x101)
grf: ddrc0_con0 : (0xff77e380 - 0x1f81)
grf: ddrc1_con0 : (0xff77e388 - 0x1f81)
grf: soc_con0 : (0xff77e200 - 0x0)
pmu: noc_auto_ena : (0xff3100d8 - 0x0)
pmu: bus_idle_req : (0xff310060 - 0x0)
pmu: bus_idle_st : (0xff310064 - 0x0)
pmugrf: os_reg2 : (0xff320308 - 0x3aa17aa1)
pmugrf: os_reg3 : (0xff32030c - 0x20000005)
pmusgrf: soc_con4 : (0xff33e010 - 0x3600)
Finish SDRAM initialization...
Trying to boot from BOOTROM
Returning to boot ROM...
U-Boot SPL 2019.10-rc3-00320-g23b93e33ad-dirty (Sep 16 2019 - 18:17:38 +0530)
Trying to boot from MMC1
NOTICE: BL31: v2.1(release):v2.1-705-g42cdeb93
NOTICE: BL31: Built : 18:17:28, Sep 16 2019
U-Boot 2019.10-rc3-00320-g23b93e33ad-dirty (Sep 16 2019 - 18:19:19 +0530)
Model: Hardkernel ODROID-N1
DRAM: rk3399_dmc_probe: pmugrf = 00000000ff320000
3.9 GiB
MMC: dwmmc@fe320000: 1, sdhci@fe330000: 0
Loading Environment from MMC... *** Warning - bad CRC, using default environment
In: serial@ff1a0000
Out: serial@ff1a0000
Err: serial@ff1a0000
Model: Hardkernel ODROID-N1
rockchip_dnl_key_pressed: adc_channel_single_shot fail!
Net:
Warning: ethernet@fe300000 (eth0) using random MAC address - f2:12:d7:dd:0e:72
eth0: ethernet@fe300000
Hit any key to stop autoboot: 0
Card did not respond to voltage select!
switch to partitions #0, OK
mmc1 is current device
Scanning mmc 1:1...
Found U-Boot script /boot/boot.scr
871 bytes read in 5 ms (169.9 KiB/s)
## Executing script at 00500000
24838656 bytes read in 1049 ms (22.6 MiB/s)
56286 bytes read in 10 ms (5.4 MiB/s)
7326472 bytes read in 314 ms (22.3 MiB/s)
## Flattened Device Tree blob at 01f00000
Booting using the fdt blob at 0x1f00000
Loading Ramdisk to f5818000, end f5f14b08 ... OK
Loading Device Tree to 00000000f5807000, end 00000000f5817fff ... OK
Starting kernel ...
---------
Can you share some input on how to resolve this issue?
or is it I am missing some configuration.
Here is the normal boot log of the
[0] https://pastebin.com/AxmqxeuU
Best Regards
-Anand
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
