* Add Kconfig help describing the purpose of each command.
* Add CONFIG_CMD_MDIO so it could be selected individually, as
it doesn't depend on the mii command.
* Add Kconfig imply to mii to automatically select the mdio
command.
Signed-off-by: Ramon Fried <rfried....@gmail.com>
---
cmd/Kconfig | 18 ++++++++++++++++--
cmd/Makefile | 4 +---
2 files changed, 17 insertions(+), 5 deletions(-)
diff --git a/cmd/Kconfig b/cmd/Kconfig
index 98647f58b7..cfb3b58119 100644
--- a/cmd/Kconfig
+++ b/cmd/Kconfig
@@ -1410,8 +1410,22 @@ config CMD_NFS
config CMD_MII
bool "mii"
- help
- Enable MII utility commands.
+ imply CMD_MDIO
+ help
+ If set, allows 802.3(clause 22) MII Management functions interface
access
+ The management interface specified in Clause 22 provides
+ a simple, two signal, serial interface to connect a
+ Station Management entity and a managed PHY for providing access
+ to management parameters and services.
+ The interface is referred to as the MII management interface.
+
+config CMD_MDIO
+ bool "mdio"
+ depends on PHYLIB
+ help
+ If set, allows Enable 802.3(clause 45) MDIO interface registers access
+ The MDIO interface is orthogonal to the MII interface and extends
+ it by adding access to more registers through indirect addressing.
config CMD_PING
bool "ping"
diff --git a/cmd/Makefile b/cmd/Makefile
index ac843b4b16..384ddb8eaf 100644
--- a/cmd/Makefile
+++ b/cmd/Makefile
@@ -89,9 +89,7 @@ obj-$(CONFIG_CMD_MEMORY) += mem.o
obj-$(CONFIG_CMD_IO) += io.o
obj-$(CONFIG_CMD_MFSL) += mfsl.o
obj-$(CONFIG_CMD_MII) += mii.o
-ifdef CONFIG_PHYLIB
-obj-$(CONFIG_CMD_MII) += mdio.o
-endif
+obj-$(CONFIG_CMD_MDIO) += mdio.o
obj-$(CONFIG_CMD_MISC) += misc.o
obj-$(CONFIG_CMD_MMC) += mmc.o
obj-$(CONFIG_MP) += mp.o
--
2.23.0
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
