Current fsl_esdhc driver had support DM_MMC with BLK enabled.
Since BLK will be hard requirement of DM_MMC, let's do this
now in fsl_esdhc driver. Don't keep BLK conditioanl compiling.
Signed-off-by: Yangbo Lu <yangbo...@nxp.com>
---
Changes for v2:
- None.
---
drivers/mmc/fsl_esdhc.c | 35 +----------------------------------
1 file changed, 1 insertion(+), 34 deletions(-)
diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
index 0731847..ff5565c 100644
--- a/drivers/mmc/fsl_esdhc.c
+++ b/drivers/mmc/fsl_esdhc.c
@@ -23,10 +23,6 @@
#include <asm/io.h>
#include <dm.h>
-#if !CONFIG_IS_ENABLED(BLK)
-#include "mmc_private.h"
-#endif
-
DECLARE_GLOBAL_DATA_PTR;
#define SDHCI_IRQ_EN_BITS (IRQSTATEN_CC | IRQSTATEN_TC | \
@@ -35,7 +31,6 @@ DECLARE_GLOBAL_DATA_PTR;
IRQSTATEN_CIE | IRQSTATEN_DTOE | IRQSTATEN_DCE
| \
IRQSTATEN_DEBE | IRQSTATEN_BRR | IRQSTATEN_BWR
| \
IRQSTATEN_DINT)
-#define ESDHC_DRIVER_STAGE_VALUE 0xffffffff
struct fsl_esdhc {
uint dsaddr; /* SDMA system address register */
@@ -98,7 +93,7 @@ struct fsl_esdhc_priv {
struct clk per_clk;
unsigned int clock;
unsigned int bus_width;
-#if !CONFIG_IS_ENABLED(BLK)
+#if !CONFIG_IS_ENABLED(DM_MMC)
struct mmc *mmc;
#endif
struct udevice *dev;
@@ -961,9 +956,6 @@ static int fsl_esdhc_probe(struct udevice *dev)
fdt_addr_t addr;
unsigned int val;
struct mmc *mmc;
-#if !CONFIG_IS_ENABLED(BLK)
- struct blk_desc *bdesc;
-#endif
int ret;
addr = dev_read_addr(dev);
@@ -1027,32 +1019,12 @@ static int fsl_esdhc_probe(struct udevice *dev)
mmc = &plat->mmc;
mmc->cfg = &plat->cfg;
mmc->dev = dev;
-#if !CONFIG_IS_ENABLED(BLK)
- mmc->priv = priv;
-
- /* Setup dsr related values */
- mmc->dsr_imp = 0;
- mmc->dsr = ESDHC_DRIVER_STAGE_VALUE;
- /* Setup the universal parts of the block interface just once */
- bdesc = mmc_get_blk_desc(mmc);
- bdesc->if_type = IF_TYPE_MMC;
- bdesc->removable = 1;
- bdesc->devnum = mmc_get_next_devnum();
- bdesc->block_read = mmc_bread;
- bdesc->block_write = mmc_bwrite;
- bdesc->block_erase = mmc_berase;
-
- /* setup initial part type */
- bdesc->part_type = mmc->cfg->part_type;
- mmc_list_add(mmc);
-#endif
upriv->mmc = mmc;
return esdhc_init_common(priv, mmc);
}
-#if CONFIG_IS_ENABLED(DM_MMC)
static int fsl_esdhc_get_cd(struct udevice *dev)
{
struct fsl_esdhc_priv *priv = dev_get_priv(dev);
@@ -1082,30 +1054,25 @@ static const struct dm_mmc_ops fsl_esdhc_ops = {
.send_cmd = fsl_esdhc_send_cmd,
.set_ios = fsl_esdhc_set_ios,
};
-#endif
static const struct udevice_id fsl_esdhc_ids[] = {
{ .compatible = "fsl,esdhc", },
{ /* sentinel */ }
};
-#if CONFIG_IS_ENABLED(BLK)
static int fsl_esdhc_bind(struct udevice *dev)
{
struct fsl_esdhc_plat *plat = dev_get_platdata(dev);
return mmc_bind(dev, &plat->mmc, &plat->cfg);
}
-#endif
U_BOOT_DRIVER(fsl_esdhc) = {
.name = "fsl-esdhc-mmc",
.id = UCLASS_MMC,
.of_match = fsl_esdhc_ids,
.ops = &fsl_esdhc_ops,
-#if CONFIG_IS_ENABLED(BLK)
.bind = fsl_esdhc_bind,
-#endif
.probe = fsl_esdhc_probe,
.platdata_auto_alloc_size = sizeof(struct fsl_esdhc_plat),
.priv_auto_alloc_size = sizeof(struct fsl_esdhc_priv),
--
2.7.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
