Hi Frieder,
> Subject: Re: [PATCH V3 24/27] imx8m: soc: probe clock device in
> arch_cpu_init_dm
>
> Hi Peng,
>
> On 27.08.19 08:25, Peng Fan wrote:
> > Because we need to get cpu freq in print_cpuinfo at very early stage,
> > so we need to make sure the ccm be probed.
> >
> > Signed-off-by: Peng Fan <peng....@nxp.com>
> > ---
> > arch/arm/mach-imx/imx8m/soc.c | 17 +++++++++++++++++
> > 1 file changed, 17 insertions(+)
> >
> > diff --git a/arch/arm/mach-imx/imx8m/soc.c
> > b/arch/arm/mach-imx/imx8m/soc.c index 3a54db4898..f904049120
> 100644
> > --- a/arch/arm/mach-imx/imx8m/soc.c
> > +++ b/arch/arm/mach-imx/imx8m/soc.c
> > @@ -14,6 +14,7 @@
> > #include <asm/mach-imx/boot_mode.h>
> > #include <asm/mach-imx/syscounter.h>
> > #include <asm/armv8/mmu.h>
> > +#include <dm/uclass.h>
> > #include <errno.h>
> > #include <fdt_support.h>
> > #include <fsl_wdog.h>
> > @@ -228,6 +229,22 @@ static void imx_set_wdog_powerdown(bool
> enable)
> > writew(enable, &wdog3->wmcr);
> > }
> >
> > +int arch_cpu_init_dm(void)
> > +{
> > + struct udevice *dev;
> > + int ret;
> > +
> > + ret = uclass_get_device_by_name(UCLASS_CLK,
> > + "clock-controller@30380000",
> > + &dev);
>
> I just upgraded my working tree to v2019.10-rc3 + your v3 MX8MM patches.
> This somehow breaks things for me. The U-Boot proper hangs when calling
> uclass_get_device_by_name(). Removing this call makes the boot work again.
> Do you have any idea what could be wrong? Do I miss something?
Please enlarge CONFIG_SYS_MALLOC_F_LEN to 0x10000 and have a try.
Regards,
Peng.
>
> Thanks,
> Frieder
>
> > + if (ret < 0) {
> > + printf("Failed to find clock node. Check device tree\n");
> > + return ret;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > int arch_cpu_init(void)
> > {
> > struct ocotp_regs *ocotp = (struct ocotp_regs
> *)OCOTP_BASE_ADDR;
> >
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
