This patch updates reset controller node for mt7628
Signed-off-by: Weijie Gao <weijie....@mediatek.com>
---
arch/mips/dts/mt7628a.dtsi | 36 ++++++++++++++++++++++++------------
1 file changed, 24 insertions(+), 12 deletions(-)
diff --git a/arch/mips/dts/mt7628a.dtsi b/arch/mips/dts/mt7628a.dtsi
index f07de1b611..0e2b6598ea 100644
--- a/arch/mips/dts/mt7628a.dtsi
+++ b/arch/mips/dts/mt7628a.dtsi
@@ -1,4 +1,5 @@
// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/reset/mt7628-reset.h>
/ {
#address-cells = <1>;
@@ -16,11 +17,6 @@
};
};
- resetc: reset-controller {
- compatible = "ralink,rt2880-reset";
- #reset-cells = <1>;
- };
-
cpuintc: interrupt-controller {
#address-cells = <0>;
#interrupt-cells = <1>;
@@ -48,6 +44,12 @@
mask = <0x1>;
};
+ rstctrl: rstctrl@0x34 {
+ reg = <0x34 0x4>;
+ compatible = "mediatek,mtmips-reset";
+ #reset-cells = <1>;
+ };
+
pinctrl: pinctrl@60 {
compatible = "mediatek,mt7628-pinctrl";
reg = <0x3c 0x2c>, <0x1300 0x100>;
@@ -202,7 +204,7 @@
compatible = "ralink,mt7628a-wdt",
"mediatek,mt7621-wdt";
reg = <0x100 0x30>;
- resets = <&resetc 8>;
+ resets = <&rstctrl MT7628_TIMER_RST>;
reset-names = "wdt";
interrupt-parent = <&intc>;
@@ -216,7 +218,7 @@
interrupt-controller;
#interrupt-cells = <1>;
- resets = <&resetc 9>;
+ resets = <&rstctrl MT7628_INT_RST>;
reset-names = "intc";
interrupt-parent = <&cpuintc>;
@@ -239,6 +241,9 @@
compatible = "mtk,mt7628-gpio", "mtk,mt7621-gpio";
reg = <0x600 0x100>;
+ resets = <&rstctrl MT7628_PIO_RST>;
+ reset-names = "pio";
+
interrupt-parent = <&intc>;
interrupts = <6>;
@@ -267,6 +272,10 @@
spi0: spi@b00 {
compatible = "ralink,mt7621-spi";
reg = <0xb00 0x40>;
+
+ resets = <&rstctrl MT7628_SPI_RST>;
+ reset-names = "spi";
+
#address-cells = <1>;
#size-cells = <0>;
@@ -282,7 +291,7 @@
clock-frequency = <40000000>;
- resets = <&resetc 12>;
+ resets = <&rstctrl MT7628_UART0_RST>;
reset-names = "uart0";
interrupt-parent = <&intc>;
@@ -300,7 +309,7 @@
clock-frequency = <40000000>;
- resets = <&resetc 19>;
+ resets = <&rstctrl MT7628_UART1_RST>;
reset-names = "uart1";
interrupt-parent = <&intc>;
@@ -318,7 +327,7 @@
clock-frequency = <40000000>;
- resets = <&resetc 20>;
+ resets = <&rstctrl MT7628_UART2_RST>;
reset-names = "uart2";
interrupt-parent = <&intc>;
@@ -333,6 +342,9 @@
reg = <0x10100000 0x10000
0x10110000 0x8000>;
+ resets = <&rstctrl MT7628_EPHY_RST>;
+ reset-names = "ephy";
+
syscon = <&sysc>;
};
@@ -343,8 +355,8 @@
#phy-cells = <0>;
ralink,sysctl = <&sysc>;
- resets = <&resetc 22 &resetc 25>;
- reset-names = "host", "device";
+ resets = <&rstctrl MT7628_UPHY_RST>;
+ reset-names = "phy";
};
ehci@101c0000 {
--
2.17.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
