This series includes a number of minor improvements to binman, including:
- Dropping some test Elf files and building them from source instead
- Refactoring of x86 16-bit entries
- Support for SPL symbols within sections
- Handle the 'notes' sections and hidden symbols in recent binutils
- Improved error reporting with a tool fails
Simon Glass (34):
patman: Drop binary parameter
patman: Update command.Run() to handle failure better
binman: Use cls instead of self for class methods
binman: Allow use of help and entry-docs without libfdt
binman: Drop .note section from ELF
binman: Handle hidden symbols in ELF files
binman: Correct use of 'replace' in IFWI tests
binman: Add support for an x86 'reset' section
binman: x86: Separate out 16-bit reset and init code
binman: Add support for Intel FIT
binman: Fix IFWI output when using an Intel FIT image
binman: Use tools.Run() to run objdump
binman: Use the Makefile to build ELF test files
binman: Use the Makefile for u_boot_ucode_ptr
binman: Use the Makefile for u_boot_no_ucode_ptr
binman: Use the Makefile for u_boot_binman_syms
binman: Use the Makefile for u_boot_binman_syms_size
binman: Use the Makefile for u_boot_binman_syms_bad
binman: Clean up unnecessary code related to ELF test files
binman: Allow symbols to be resolved inside sections
binman: Use underscore in test filenames
binman: Rename some two-digit test files
binman: Avoid needing the section size in advance
binman: Increase size of TPL and SPL test data
binman: Allow support for writing a size symbol to binaries
binman: Correct symbol calculation with non-zero image base
binman: Add support for Intel FSP meminit
binman: Fix entry comment for Intel descriptor
binman: Update IFWI entry to read entries outside constructor
binman: Update IFWI entry to support updates
binman: Support writing symbols into entries within an IFWI
binman: Write symbol info before image inclusion
binman: Add logging for the number of pack passes
binman: Drop comment-out code in testUpdateFdtOutput()
Makefile | 10 +-
arch/x86/dts/u-boot.dtsi | 9 +
scripts/Makefile.spl | 22 +-
tools/binman/README.entries | 136 ++++++++--
tools/binman/control.py | 13 +-
tools/binman/elf.py | 11 +-
tools/binman/elf_test.py | 57 ++++-
tools/binman/entry.py | 5 +-
tools/binman/etype/blob.py | 1 -
tools/binman/etype/blob_dtb.py | 6 +-
tools/binman/etype/cbfs.py | 5 +-
tools/binman/etype/fdtmap.py | 13 +-
tools/binman/etype/files.py | 5 +-
tools/binman/etype/intel_descriptor.py | 2 +-
tools/binman/etype/intel_fit.py | 32 +++
tools/binman/etype/intel_fit_ptr.py | 41 +++
tools/binman/etype/intel_fsp_m.py | 27 ++
tools/binman/etype/intel_ifwi.py | 68 +++--
tools/binman/etype/section.py | 16 +-
tools/binman/etype/u_boot_dtb_with_ucode.py | 5 +-
tools/binman/etype/u_boot_spl.py | 2 +-
tools/binman/etype/u_boot_tpl.py | 2 +-
tools/binman/etype/x86_reset16.py | 29 +++
tools/binman/etype/x86_reset16_spl.py | 29 +++
tools/binman/etype/x86_reset16_tpl.py | 29 +++
tools/binman/etype/x86_start16.py | 15 +-
tools/binman/etype/x86_start16_spl.py | 19 +-
tools/binman/etype/x86_start16_tpl.py | 18 +-
tools/binman/ftest.py | 241 ++++++++++++------
tools/binman/test/021_image_pad.dts | 2 +-
tools/binman/test/024_sorted.dts | 2 +-
tools/binman/test/028_pack_4gb_outside.dts | 2 +-
.../test/{029_x86-rom.dts => 029_x86_rom.dts} | 2 +-
...no-desc.dts => 030_x86_rom_me_no_desc.dts} | 0
...{031_x86-rom-me.dts => 031_x86_rom_me.dts} | 0
.../{032_intel-vga.dts => 032_intel_vga.dts} | 0
...33_x86-start16.dts => 033_x86_start16.dts} | 0
.../{042_intel-fsp.dts => 042_intel_fsp.dts} | 0
.../{043_intel-cmc.dts => 043_intel_cmc.dts} | 0
.../{046_intel-vbt.dts => 046_intel_vbt.dts} | 0
...tart16-spl.dts => 048_x86_start16_spl.dts} | 0
tools/binman/test/053_symbols.dts | 2 +-
...tart16-tpl.dts => 081_x86_start16_tpl.dts} | 0
...=> 098_4gb_and_skip_at_start_together.dts} | 0
..._x86-rom-ifwi.dts => 111_x86_rom_ifwi.dts} | 2 +-
...nodesc.dts => 112_x86_rom_ifwi_nodesc.dts} | 2 +-
...nodata.dts => 113_x86_rom_ifwi_nodata.dts} | 2 +-
tools/binman/test/144_x86_reset16.dts | 13 +
tools/binman/test/145_x86_reset16_spl.dts | 13 +
tools/binman/test/146_x86_reset16_tpl.dts | 13 +
tools/binman/test/147_intel_fit.dts | 20 ++
tools/binman/test/148_intel_fit_missing.dts | 17 ++
tools/binman/test/149_symbols_tpl.dts | 28 ++
...> 150_powerpc_mpc85xx_bootpg_resetvec.dts} | 0
.../binman/test/151_x86_rom_ifwi_section.dts | 33 +++
tools/binman/test/152_intel_fsp_m.dts | 14 +
tools/binman/test/Makefile | 14 +-
tools/binman/test/bss_data | Bin 5020 -> 0 bytes
tools/binman/test/u_boot_binman_syms | Bin 4924 -> 0 bytes
tools/binman/test/u_boot_binman_syms.c | 1 +
tools/binman/test/u_boot_binman_syms.lds | 3 +-
tools/binman/test/u_boot_binman_syms_bad | Bin 4890 -> 0 bytes
tools/binman/test/u_boot_binman_syms_size | Bin 4825 -> 0 bytes
tools/binman/test/u_boot_no_ucode_ptr | Bin 4182 -> 0 bytes
tools/binman/test/u_boot_ucode_ptr | Bin 4175 -> 0 bytes
tools/binman/test/u_boot_ucode_ptr.lds | 3 +-
tools/patman/cros_subprocess.py | 3 +-
tools/patman/tools.py | 23 +-
68 files changed, 870 insertions(+), 212 deletions(-)
create mode 100644 tools/binman/etype/intel_fit.py
create mode 100644 tools/binman/etype/intel_fit_ptr.py
create mode 100644 tools/binman/etype/intel_fsp_m.py
create mode 100644 tools/binman/etype/x86_reset16.py
create mode 100644 tools/binman/etype/x86_reset16_spl.py
create mode 100644 tools/binman/etype/x86_reset16_tpl.py
rename tools/binman/test/{029_x86-rom.dts => 029_x86_rom.dts} (87%)
rename tools/binman/test/{030_x86-rom-me-no-desc.dts =>
030_x86_rom_me_no_desc.dts} (100%)
rename tools/binman/test/{031_x86-rom-me.dts => 031_x86_rom_me.dts} (100%)
rename tools/binman/test/{032_intel-vga.dts => 032_intel_vga.dts} (100%)
rename tools/binman/test/{033_x86-start16.dts => 033_x86_start16.dts} (100%)
rename tools/binman/test/{042_intel-fsp.dts => 042_intel_fsp.dts} (100%)
rename tools/binman/test/{043_intel-cmc.dts => 043_intel_cmc.dts} (100%)
rename tools/binman/test/{046_intel-vbt.dts => 046_intel_vbt.dts} (100%)
rename tools/binman/test/{048_x86-start16-spl.dts => 048_x86_start16_spl.dts}
(100%)
rename tools/binman/test/{081_x86-start16-tpl.dts => 081_x86_start16_tpl.dts}
(100%)
rename tools/binman/test/{80_4gb_and_skip_at_start_together.dts =>
098_4gb_and_skip_at_start_together.dts} (100%)
rename tools/binman/test/{111_x86-rom-ifwi.dts => 111_x86_rom_ifwi.dts} (95%)
rename tools/binman/test/{112_x86-rom-ifwi-nodesc.dts =>
112_x86_rom_ifwi_nodesc.dts} (95%)
rename tools/binman/test/{113_x86-rom-ifwi-nodata.dts =>
113_x86_rom_ifwi_nodata.dts} (95%)
create mode 100644 tools/binman/test/144_x86_reset16.dts
create mode 100644 tools/binman/test/145_x86_reset16_spl.dts
create mode 100644 tools/binman/test/146_x86_reset16_tpl.dts
create mode 100644 tools/binman/test/147_intel_fit.dts
create mode 100644 tools/binman/test/148_intel_fit_missing.dts
create mode 100644 tools/binman/test/149_symbols_tpl.dts
rename tools/binman/test/{81_powerpc_mpc85xx_bootpg_resetvec.dts =>
150_powerpc_mpc85xx_bootpg_resetvec.dts} (100%)
create mode 100644 tools/binman/test/151_x86_rom_ifwi_section.dts
create mode 100644 tools/binman/test/152_intel_fsp_m.dts
delete mode 100755 tools/binman/test/bss_data
delete mode 100755 tools/binman/test/u_boot_binman_syms
delete mode 100755 tools/binman/test/u_boot_binman_syms_bad
delete mode 100755 tools/binman/test/u_boot_binman_syms_size
delete mode 100755 tools/binman/test/u_boot_no_ucode_ptr
delete mode 100755 tools/binman/test/u_boot_ucode_ptr
--
2.23.0.187.g17f5b7556c-goog
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
