On Tue, 22 Jun 2010 11:29:30 +0200 Andre Schwarz <andre.schw...@matrix-vision.de> wrote:
> are you using TOT of mpc83xx or master ? Wolfgang's master. > > ToT seems to be working fine for me (using different PHYs though): > > > > U-Boot 2010.06-rc2-00035-g1f24126 (Jun 21 2010 - 11:16:54) MPC83XX > > > > > [snip] > > you can try applying commit 71bd860cce4493c5def07804723661e75271052b > > "mpc83xx: don't shift pre-shifted ACR, SPCR, SCCR bitfield masks in > > cpu_init." but I don't think that's the problem, since it doesn't > > affect the p2020. > > > > This is already present in current master. right, but both of you didn't give enough version data in your initial postings for me to know whether it was included - you mentioned you were on 2010.3, whereas this commit is v2010.03-334-g71bd860, i.e. 334 commmits after the 2010.3 release. btw, the u-boot banner gives the sha on which it is based - e.g., mine above is based on commit 1f24126. > > Upgrade to ToT? Start a git bisect? on drivers/net/tsec.c? > > > I'm on ToT of current master. > Tried starting a bisect, but couldn't find a working version ... went > back until v2009.1 ... very strange. some register settings, esp. in the case of the commit above, survive a soft-reset, so bisecting may not help unless the board is completely power-cycled between each iteration. Kim _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
