This series adds support for the SD host controller on the Aspeed ast2xxx SocS. It also enables MMC and the SD controller for the ast2500 EVB.
Changes since v2: - Remove mmc_initialize call in the ast2500 board init - Add OF_CONTROL to the ast2500 EVB configuration - Fix the clock-getting code in the driver probe function Changes since v1: - Split the patch up - Add defconfig and devicetree changes Eddie James (4): clk: aspeed: Add support for SD clock mmc: Add Aspeed SD controller driver configs: AST2500 EVB: Enable SD controller ARM: dts: ast2500: Add SDHCI nodes arch/arm/dts/ast2500-evb.dts | 14 ++++ arch/arm/dts/ast2500-u-boot.dtsi | 16 +++++ arch/arm/include/asm/arch-aspeed/scu_ast2500.h | 3 + arch/arm/include/asm/gpio.h | 3 +- configs/evb-ast2500_defconfig | 8 +++ drivers/clk/aspeed/clk_ast2500.c | 27 ++++++++ drivers/mmc/Kconfig | 11 ++++ drivers/mmc/Makefile | 1 + drivers/mmc/aspeed_sdhci.c | 90 ++++++++++++++++++++++++++ drivers/pinctrl/aspeed/pinctrl_ast2500.c | 2 + 10 files changed, 174 insertions(+), 1 deletion(-) create mode 100644 drivers/mmc/aspeed_sdhci.c -- 1.8.3.1 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
