mmc_wait_dat0() expects timeout argument to be in usec units. But some
overlying functions operate on timeout in msec units. Convert timeout
from msec to usec when passing it to mmc_wait_dat0().
This fixes 'avb' commands on BeagleBoard X15, because next chain was
failing:
get_partition() -> mmc_switch_part() -> __mmc_switch() ->
mmc_wait_dat0()
when passing incorrect timeout from __mmc_switch() to mmc_wait_dat0().
Fixes: bb98b8c5c06a ("mmc: During a switch, poll on dat0 if available and check
the final status")
Signed-off-by: Sam Protsenko <semen.protse...@linaro.org>
---
drivers/mmc/mmc.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index eecc7d687e..e247730ff2 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -235,7 +235,7 @@ int mmc_poll_for_busy(struct mmc *mmc, int timeout)
unsigned int status;
int err;
- err = mmc_wait_dat0(mmc, 1, timeout);
+ err = mmc_wait_dat0(mmc, 1, timeout * 1000);
if (err != -ENOSYS)
return err;
@@ -778,7 +778,7 @@ static int __mmc_switch(struct mmc *mmc, u8 set, u8 index,
u8 value,
start = get_timer(0);
/* poll dat0 for rdy/buys status */
- ret = mmc_wait_dat0(mmc, 1, timeout);
+ ret = mmc_wait_dat0(mmc, 1, timeout * 1000);
if (ret && ret != -ENOSYS)
return ret;
--
2.20.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
