++++++++++++++++++++++++++
drivers/pinctrl/aspeed/pinctrl_ast2500.c | 2 +
8 files changed, 127 insertions(+), 1 deletion(-) create mode 100644
drivers/mmc/aspeed_sdhci.c
diff --git a/arch/arm/include/asm/arch-aspeed/scu_ast2500.h
b/arch/arm/include/asm/arch-aspeed/scu_ast2500.h
index 4988ced..8db4901 100644
--- a/arch/arm/include/asm/arch-aspeed/scu_ast2500.h
+++ b/arch/arm/include/asm/arch-aspeed/scu_ast2500.h
@@ -22,6 +22,8 @@
#define SCU_MPLL_POST_MASK (0x3f << SCU_MPLL_POST_SHIFT)
#define SCU_PCLK_DIV_SHIFT 23
#define SCU_PCLK_DIV_MASK (7 << SCU_PCLK_DIV_SHIFT)
+#define SCU_SDCLK_DIV_SHIFT 12
+#define SCU_SDCLK_DIV_MASK (7 << SCU_SDCLK_DIV_SHIFT)
#define SCU_HPLL_DENUM_SHIFT 0
#define SCU_HPLL_DENUM_MASK 0x1f
#define SCU_HPLL_NUM_SHIFT 5
@@ -107,6 +109,7 @@
#define SCU_CLKSTOP_MAC1 (1 << 20)
#define SCU_CLKSTOP_MAC2 (1 << 21)
+#define SCU_CLKSTOP_SDCLK (1 << 27)
#define SCU_D2PLL_EXT1_OFF (1 << 0)
#define SCU_D2PLL_EXT1_BYPASS (1 << 1)
diff --git a/arch/arm/include/asm/gpio.h b/arch/arm/include/asm/gpio.h
index 370031f..38a5922 100644
--- a/arch/arm/include/asm/gpio.h
+++ b/arch/arm/include/asm/gpio.h
@@ -1,6 +1,7 @@
#if !defined(CONFIG_ARCH_UNIPHIER) && !defined(CONFIG_ARCH_STI) &&
\
!defined(CONFIG_ARCH_K3) && !defined(CONFIG_ARCH_BCM6858) &&
\
- !defined(CONFIG_ARCH_BCM63158)
&& !defined(CONFIG_ARCH_ROCKCHIP)
+ !defined(CONFIG_ARCH_BCM63158)
&& !defined(CONFIG_ARCH_ROCKCHIP) && \
+ !defined(CONFIG_ARCH_ASPEED)
#include <asm/arch/gpio.h>
#endif
#include <asm-generic/gpio.h>
diff --git a/arch/arm/mach-aspeed/ast2500-board.c
b/arch/arm/mach-aspeed/ast2500-board.c
index e7edd54..52a4e05 100644
--- a/arch/arm/mach-aspeed/ast2500-board.c
+++ b/arch/arm/mach-aspeed/ast2500-board.c
@@ -4,6 +4,7 @@
*/
#include <common.h>
#include <dm.h>
+#include <mmc.h>
#include <ram.h>
#include <timer.h>
#include <asm/io.h>
@@ -55,6 +56,8 @@ int board_init(void)
{
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+ mmc_initialize(gd->bd);
+
return 0;
}
diff --git a/drivers/clk/aspeed/clk_ast2500.c
b/drivers/clk/aspeed/clk_ast2500.c
index dbee13a..9249cf9 100644
--- a/drivers/clk/aspeed/clk_ast2500.c
+++ b/drivers/clk/aspeed/clk_ast2500.c
@@ -143,6 +143,17 @@ static ulong ast2500_clk_get_rate(struct clk *clk)
rate = rate / apb_div;
}
break;
+ case BCLK_SDCLK:
+ {
+ ulong apb_div = 4 + 4 * ((readl(&priv->scu->clk_sel1)
+ & SCU_SDCLK_DIV_MASK)
+ >> SCU_SDCLK_DIV_SHIFT);
+ rate = ast2500_get_hpll_rate(clkin,
+ readl(&priv->
+ scu->h_pll_param));
+ rate = rate / apb_div;
+ }
+ break;
case PCLK_UART1:
rate = ast2500_get_uart_clk_rate(priv->scu, 1);
break;
@@ -436,6 +447,22 @@ static int ast2500_clk_enable(struct clk *clk)
struct ast2500_clk_priv *priv = dev_get_priv(clk->dev);
switch (clk->id) {
+ case BCLK_SDCLK:
+ if (readl(&priv->scu->clk_stop_ctrl1) & SCU_CLKSTOP_SDCLK) {
+ ast_scu_unlock(priv->scu);
+
+ setbits_le32(&priv->scu->sysreset_ctrl1,
+ SCU_SYSRESET_SDIO);
+ udelay(100);
+ clrbits_le32(&priv->scu->clk_stop_ctrl1,
+ SCU_CLKSTOP_SDCLK);
+ mdelay(10);
+ clrbits_le32(&priv->scu->sysreset_ctrl1,
+ SCU_SYSRESET_SDIO);
+
+ ast_scu_lock(priv->scu);
+ }
+ break;
/*
* For MAC clocks the clock rate is
* configured based on whether RGMII or RMII mode has been selected
diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig index
c6812f6..536f66a 100644
--- a/drivers/mmc/Kconfig
+++ b/drivers/mmc/Kconfig
@@ -421,6 +421,17 @@ config SPL_MMC_SDHCI_ADMA
This enables support for the ADMA (Advanced DMA) defined
in the SD Host Controller Standard Specification Version 3.00 in SPL.
+config MMC_SDHCI_ASPEED
+ bool "Aspeed SDHCI controller"
+ depends on ARCH_ASPEED
+ depends on DM_MMC
+ depends on MMC_SDHCI
+ help
+ Enables support for the Aspeed SDHCI 2.0 controller present on
Aspeed
+ SoCs. This device is compatible with SD 3.0 and/or MMC 4.3
+ specifications. On the AST2600, the device is also compatible with
+ MMC 5.1 and eMMC 3.0.
+
config MMC_SDHCI_ATMEL
bool "Atmel SDHCI controller support"
depends on ARCH_AT91
diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile index
6cc018b..5594195 100644
--- a/drivers/mmc/Makefile
+++ b/drivers/mmc/Makefile
@@ -46,6 +46,7 @@ obj-$(CONFIG_JZ47XX_MMC) += jz_mmc.o
# SDHCI
obj-$(CONFIG_MMC_SDHCI) += sdhci.o
+obj-$(CONFIG_MMC_SDHCI_ASPEED) += aspeed_sdhci.o
obj-$(CONFIG_MMC_SDHCI_ATMEL) += atmel_sdhci.o
obj-$(CONFIG_MMC_SDHCI_BCM2835) += bcm2835_sdhci.o
obj-$(CONFIG_MMC_SDHCI_BCMSTB) += bcmstb_sdhci.o
diff --git a/drivers/mmc/aspeed_sdhci.c b/drivers/mmc/aspeed_sdhci.c new
file mode 100644 index 0000000..c292c42
--- /dev/null
+++ b/drivers/mmc/aspeed_sdhci.c
@@ -0,0 +1,78 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright 2019 IBM Corp.
+ * Eddie James <eaja...@linux.ibm.com>
+ */
+
+#include <common.h>
+#include <clk.h>
+#include <dm.h>
+#include <malloc.h>
+#include <sdhci.h>
+
+struct aspeed_sdhci_plat {
+ struct mmc_config cfg;
+ struct mmc mmc;
+};
+
+static int aspeed_sdhci_probe(struct udevice *dev) {
+ struct mmc_uclass_priv *upriv = dev_get_uclass_priv(dev);
+ struct aspeed_sdhci_plat *plat = dev_get_platdata(dev);
+ struct sdhci_host *host = dev_get_priv(dev);
+ u32 max_clk;
+ struct clk clk;
+ int ret;
+
+ ret = clk_get_by_index(dev, 0, &clk);
+ if (ret)
+ return ret;
+
+ ret = clk_enable(&clk);
+ if (ret)
+ return ret;
+
+ host->name = dev->name;
+ host->ioaddr = (void *)devfdt_get_addr(dev);
+
+ max_clk = clk_get_rate(&clk);
+ if (!max_clk)
+ return -EINVAL;
+
+ host->max_clk = max_clk;
+ host->mmc = &plat->mmc;
+ host->mmc->dev = dev;
+ host->mmc->priv = host;
+ upriv->mmc = host->mmc;
+
+ ret = sdhci_setup_cfg(&plat->cfg, host, 0, 0);
+ if (ret)
+ return ret;
+
+ return sdhci_probe(dev);
+}
+
+static int aspeed_sdhci_bind(struct udevice *dev) {
+ struct aspeed_sdhci_plat *plat = dev_get_platdata(dev);
+
+ return sdhci_bind(dev, &plat->mmc, &plat->cfg); }
+
+static const struct udevice_id aspeed_sdhci_ids[] = {
+ { .compatible = "aspeed,ast2400-sdhci" },
+ { .compatible = "aspeed,ast2500-sdhci" },
+ { .compatible = "aspeed,ast2600-sdhci" },
+ { }
+};
+
+U_BOOT_DRIVER(aspeed_sdhci_drv) = {
+ .name = "aspeed_sdhci",
+ .id = UCLASS_MMC,
+ .of_match = aspeed_sdhci_ids,
+ .ops = &sdhci_ops,
+ .bind = aspeed_sdhci_bind,
+ .probe = aspeed_sdhci_probe,
+ .priv_auto_alloc_size = sizeof(struct sdhci_host),
+ .platdata_auto_alloc_size = sizeof(struct aspeed_sdhci_plat), };
diff --git a/drivers/pinctrl/aspeed/pinctrl_ast2500.c
b/drivers/pinctrl/aspeed/pinctrl_ast2500.c
index ed333b9..a6e9c0d 100644
--- a/drivers/pinctrl/aspeed/pinctrl_ast2500.c
+++ b/drivers/pinctrl/aspeed/pinctrl_ast2500.c
@@ -58,6 +58,8 @@ static const struct ast2500_group_config
ast2500_groups[] = {
{ "MDIO1", 3, (1 << 31) | (1 << 30) },
{ "MAC2LINK", 1, (1 << 1) },
{ "MDIO2", 5, (1 << 2) },
+ { "SD1", 5, (1 << 0) },
+ { "SD2", 5, (1 << 1) },
};
static int ast2500_pinctrl_get_groups_count(struct udevice *dev)
--
1.8.3.1
