u-boot-boun...@lists.denx.de wrote on Friday, June 18, 2010 12:50 PM: > Dear Minkyu Kang, > > In message <4c1b4aee.8090...@samsung.com> you wrote: >> ATAG_VIDEOLFB is not used anywhere. > > ... not any more, that is. > >> The belowing warning is occurred due to this ATAG. >> >> [ 0.000000] Ignoring unrecognised tag 0x54410008 >> >> This patch fixed it. > > I think we should try to find another way to fix this. > >> - defined (CONFIG_VFD) || \ >> - defined (CONFIG_LCD) >> + defined (CONFIG_REVISION_TAG) >> static void setup_start_tag (bd_t *bd); > ... >> -# if defined (CONFIG_VFD) || defined (CONFIG_LCD) >> -static void setup_videolfb_tag (gd_t *gd); >> -# endif > ... >> - defined (CONFIG_REVISION_TAG) || \ >> - defined (CONFIG_LCD) || \ >> - defined (CONFIG_VFD) >> + defined (CONFIG_REVISION_TAG) > ... >> -#if defined (CONFIG_VFD) || defined (CONFIG_LCD) >> - setup_videolfb_tag ((gd_t *) gd); >> -#endif > ... > > etc. > > By removing all references to CONFIG_VFD you break support for the > board using this feature. As far as I know this board is stillrunnign
If you reference to the trab board, then yes it is still running. But on this board a very very old version of U-Boot is running, and I don't see, that this would change during the remaining lifetime of the board. Thus it's fine by me to break/remove the board support from current U-Boot. > a 2.4.27-vrs1 kernel, which hdas ATAG_VIDEOLFB defined and used in > include/asm-arm/setup.h resp. arch/arm/kernel/setup.c > > Best regards, > > Wolfgang Denk Best regards, Martin Krause Development Phone +49 8153 9308-157, Fax +49 8153 9308-7157 mailto:martin.kra...@tqs.de TQ-Systems GmbH Muehlstrasse 2, Gut Delling, D-82229 Seefeld, Germany Amtsgericht München, HRB 105 018, UST-IdNr. DE 811 607 913 Place of business: Seefeld Managing Directors: Dipl.-Ing. (FH) Detlef Schneider, Dipl.-Ing. (FH) Rüdiger Stahl http://www.tq-group.com/ _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot