Misc. fixes related to pinmux configuration (fan), default bootargs, reset reason output and power rail configuration.
Changes in v2: * Rebased on the latest u-boot-tegra/master * Attached R-b tags [Oleksandr Suvorov] from v1 [1] [1] https://patchwork.ozlabs.org/cover/1139705/ Dominik Sliwa (2): apalis-tk1/t30: colibri_t30: display reset reason apalis-tk1: remove non-esential power rails on boot Igor Opaniuk (5): apalis-tk1: set apalis gpio 8 aka fan_en apalis-tk1: provide proper USB vendor id apalis-tk1: enable user debug by default apalis-tk1: add pcie_aspm=off to defargs apalis-tk1: switch to zImage Marcel Ziswiler (2): apalis-tk1: do not explicitly release reset_moci# apalis-tk1: remove default vesa vga mode from vidargs arch/arm/mach-tegra/sys_info.c | 32 ++++++++----- arch/arm/mach-tegra/tegra124/cpu.c | 45 +++++++++++++++++++ board/toradex/apalis-tk1/apalis-tk1.c | 10 +++++ board/toradex/apalis-tk1/as3722_init.c | 23 ++++++++++ .../apalis-tk1/pinmux-config-apalis-tk1.h | 2 +- configs/apalis-tk1_defconfig | 2 +- include/configs/apalis-tk1.h | 17 +++---- 7 files changed, 111 insertions(+), 20 deletions(-) -- 2.17.1 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
